Results forverifying protection test probe cfrom 257 Products.
|
|
UL Test Probes UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of ...
|
|
|
|
|
IEC60529 Ingress Protection Testing Equipment . List Of Equipment In Compliance With IEC 60529 IEC 60529 Test Equipment . List Of Equipment In Compliance With IEC 60529 No. Items ...
|
|
|
|
|
IEC 60529 Test Equipment . List Of Equipment In Compliance With IEC 60529 No. Items Description 1 IEC 60529 Test Sphere 50mm, IP1X IEC 60529 IP1X Test Sphere 50mm This probe is ...
|
|
|
|
|
UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of persons and ...
|
|
|
|
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
EC61032 Figure 7 Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884...
|
|
|
|
|
IEC 60529 Test rod 2.5mm, IP3X Usage This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
IEC 60529 Test Sphere 50mm, IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
IEC 60529 IP1X Ingress Protection Test Equipment Test Sphere Probe With Force Of 0-50N This probe is intended to verify protection of persons against access to hazardous parts for ...
|
|
|
|
|
IEC61032 Test Finger Probe Test Probe D 35mm Sphere Diameter 1mm Wire Diameter Application:This rod probe is intended to verify the protection of persons against access to ...
|
|
|
|
|
IEC 60065:2014 clause 9.1.1.3Test probe B Standard Conforms to IEC 60065:2014 clause 9.1.1.3, 13.4, IEC 61032 test probe B, figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, ...
|
|
|
|
|
12.5 mm Test Sphere Probe 2 With Handle , IEC61032 Figure 6 Probe 2 Test Probe Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2,IEC60529 of IP2. It ...
|
|
|
|
|
IEC 60529 IP1X Ingress Protection Test Equipment Test Sphere Probe Sphere of 50mm Description: IEC 60529 12.3 Acceptance conditions The protection is satisfactory if adequate ...
|
|
|
|
|
Test Sphere Probe , Test Finger Probe IEC61032 Fig.1 With Force Of 50N Product information: It conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and IEC60065. ...
|
|
|
|
|
IEC60529 IP2X Ingress Protection Test Equipment Test Probe 2 With Force of 30N Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to verify the degree ...
|
|
|
|
|
Test Finger Probe B Product information: This is a precision test finger made in accordance with many standards like IEC 61032 figure 2, IEC60950 figure 2A,IEC60884,IEC60335,UL507...
|
|
|
|
|
IEC 60529 IP Testing Equipment Test Probe C for IP3 and Protection against contact hazards Product Introduction for IP Testing Equipment: The 2.5mm test rod conforms to IEC61032 ...
|
|
|
|
|
IEC61032 Figure 6 Sphere Test Probe 1 Product information: This test sphere probe confirms to IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507 standards. It is ...
|
|
|
|
|
IEC60529 IP Testing Equipment Test Probe D for IP4X 1mm Probe Product Introduction for IP Testing Equipment: The 1.0mm test rod conforms to IEC61032 figure 4 named test probe D and ...
|
|
|
|
|
Test Sphere Probe HT-I01 Description: This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used ...
|
|
|
You may also be interested in :
