|
[China]
Trade Verify
Address: Room 1705,Office Building B1,Wanda Plaza,No.2707,Kaichuang Road,Guangzhou,Guangdong,China
Contact name:MileyZhu
Guangzhou Rongtao Medical Tech LTD. |
|
Verified Suppliers
|
|
|
GE 3CRF Micro-convex Ultrasound Transducer
1. Type: Micro-Convex array
2. Frequency: 1.0-5.0 MHz
3. Compatible system: Logiq S6
4. Application: Abdominal,OB/GYN & Vascular
5. Condition: pre-owned one, original, in good working condition
6. With 60 days warranty
Parts of GE probes we can offer:
| Brand | Model | Compatible System |
| GE | 3.5C | Logiq 3/ Logiq 5/ Logiq 7/ Logiq 9/ Logiq A5/ Logiq P5/ Logiq S6/Vivid7 |
| GE | 3C | Logiq 3/ Logiq 5 |
| GE | 3Cb | Logic 200 Pro |
| GE | 3CRF | Logiq S6 |
| GE | 3CRF-D | Logiq S8/ Logiq E9 |
| GE | 3SP | LOGIQ P |
| GE | 3Sp-D | Voluson E6/Voluson E8 / Bt08 & Higher version |
| GE | 3S | vivid & Logiq series |
| GE | 3S-RS | Loqigbook/XP/ Vivid-I |
| GE | 3S-SC | venue 40 |
| GE | 3S-RC | Logiq C5/ Logiq C2/ Logiq C3 |
| GE | 3SC-RS | Vivid S5/ Vivid iq/ Vivid i |
| GE | 3.8CA | Logiq P3 |
| GE | 3V-D | Vivid E9 |
| GE | 3.8C-RC | Loqig C2/Logiq C3/ Logiq C5/ Logiq premiums |
| GE | 4C | Logiq & Vivid Series |
Knowledge Point
Basic Ultrasound Transducer Types
1. Linear Transducers
2. Convex or curved array Transducers
3. Phased Array Transducers
4. Sector Transducers
5. Endocavity Transducers
6. 3d/4d Transducers
7. Tee Transducers
Warnings and cautions of ultrasonic probe
★The ultrasonic probe is a valuable device. It must be careful in the process of use. Avoid dropping, impact, or abrasion to transducers.
★When installing or removing the probe, first switch off the power and then operate it carefully.
★Avoid rapid and extreme temperature changes, as well as lengthy exposure to direct sunlight or a strong ultraviolet light source.
★Do not use sharp objects to penetrate the acoustic lens.Once the acoustic lens is damaged, the coupling gel is easy to enter the interior of the probe and damage the piezoelectric element.
★Do not soak transducer in any liquid above the recommended level as stated in the user manual for your system, please operate according to the manufacturer's instructions, otherwise it will lead to circuit failure or even burn out.
★Do not disinfect at high temperature, because the probe is equipped with piezoelectric ceramics, high temperature will weaken the effect.
★Before use, carefully check whether the housing and cable are damaged, so as to prevent the probe from high voltage injury.
★After the probe is used, the residual coupling gel on the probe must be wiped clean to prevent rats or other animals from gnawing the lens.
FAQ
Q: How's the stock condition?
A: Wide variety of Ultrasound probe/board, over 10,000 pcs in stock, involved in popular brands and systems(GE, Hitachi Aloka, Siemens,Toshiba, , Biosound---)
Q: Is there any guarantee for the goods?
A: Fully-tested and safe packing before shipping, less than 3% warranty return claims of previous orders.
Q: Will you provide warranty?
A: Items are sold with NO WARRANTY, unless it is stated otherwise in the body of the proforma invoice/purchase order. Mostly 90 days for new original, 30/60 days for used.
Q: Can I have the goods returned if it is not working good?
A: Yes, goods are permitted to be returned in same received condition within 7 days. Refund will be handled within 2-4 working days after final confirmation (Freight & bank fee excluded). Shipping fee for return should be borne by buyers. No returns after 3 days if ordered wrong.
