Active Member
|
[China]
Address: 18F, Building 2, Nantai Yunchuanggu, Phoenix Community, Guangming District, Shenzhen, Guangdong, China
Contact name:Amy
Shenzhen FRIDA LCD Co., Ltd |
|
|
15.6 Inch Tft Screen 1920x1080 All Viewing Angle Edp Interface 30 Pins
General Description:
NV156FHM-N69 display brightness 300 cd/m², contrast ratio 1200:1 (Typ.) (Transmissive), best viewing angle full view, response time 20ms, viewing angle 85/85/85/85 (Typ.) (CR≥10), operation mode HADS, constant black display, transmissive, support color 16.2M , 100% sRGB.
Features:
1.2 lane eDP interface with 2.7Gbps link rates
2.Thin and light weight
3.16.2M(6bits+FRC) color depth, color gamut sRGB 100%
4.Single LED lighting bar (Bottom side/Horizontal Direction)
5.Data enable signal mode
6.Side mounting frame
7.Green product (RoHS & Halogen free product)
8.On board LED driving circuit
9.Low driving voltage and low power consumption
10.On board EDID chip
11.Adjust backlight brightness with DC mode
Specifications:
| Parameter | Specification | Unit |
| Active area | 344.16(H) × 193.59(V) | mm |
| Number of pixels | 1920 (H) × 1080 (V) | pixels |
| Pixel pitch | 179.25(H) × 179.25(V) | um |
| Pixel arrangement | RGB Vertical stripe | |
| Display colors | 16.2M(6bits+FRC) | |
| Color gamut | sRGB 100% | |
| Display mode | Normally Black | |
Dimensional outline | 350.66± 0.3 (H)*204.04± 0.3(V)(W/O PCB)*2.6 (Max) 350.66±0.3(H)*211.54±0.5(V) (W/PCB)*2.6 (Max) | mm |
| Weight | 280(max) | g |
| Surface treatment | Anti-Glare | |
| Surface hardness | 3H | |
| Back-light | Bottom edge side, 1-LED lighting bar type | |
Power consumption | PD : 0.75(Max.) | W |
| PBL : 3.3(Max.) | W | |
| PTotal : 4.05(Max.) | W |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit |
| Power Supply Voltage | VDD | -0.3 | 4.0 | V |
| eDP input Voltage | VeDP | 0 | 2.0 | V |
| Logic Supply Voltage | VIN | VSS-0.3 | VDD+0.3 | V |
| Operating Temperature | TOP | 0 | +50 | °C |
| Storage Temperature | TST | -20 | +60 | °C |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | ||
| Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V | |
| Permissible Input Ripple Voltage | VRF | -10% VDD | - | +10% VDD | V | |
BIST Control Level | High Level | 1.44 | - | 3.3 | V | |
Low Level | 0 | - | 0.27 | V | ||
| Power Supply Inrush Current | Inrush | - | - | 2 | A | |
| Power Supply Current | Mosaic | DD | - | - | 228 | mA |
| RGB | - | - | 334 | mA | ||
Power Consumption | Mosaic | PM | - | - | 0.75 | W |
| RGB | PRGB | - | - | 1.1 | W | |
| BLU | PBL | - | - | 3.3 | W | |
| Total | PTotal | - | - | 4.05 | W | |
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Viewing AngleRange | Horizontal | Θ3 | CR > 10 | - | 85 | - | Deg. |
Θ9 | - | 85 | - | Deg. | |||
| Vertical | Θ12 | - | 85 | - | Deg. | ||
Θ6 | - | 85 | - | Deg. | |||
| Luminance Contrast Ratio | CR | Θ = 0. | 1000 | 1200 | - | ||
| Luminance of White | 5 Points | Yw | Θ = 0. ILED = 16.7mA | 255 | 300 | 375 | cd/m2 |
| White Luminance Uniformity | 5 Points | ΔY5 | 80 | - | - | % | |
| 13 Points | ΔY13 | 60 | - | - | % | ||
| White Chromaticity | Wx | Θ = 0. | 0.283 | 0.313 | 0.343 | ||
Wy | 0.299 | 0.329 | 0.359 | ||||
Reproduction of Color | Red | Rx | Θ = 0. | Typ.-0.03 | 0.646 | Typ.+0.03 | |
| R | 0.335 | ||||||
| Green | Gx | 0.311 | |||||
Gy | 0.624 | ||||||
| Blue | Bx | 0.154 | |||||
By | 0.059 | ||||||
Color Gamut(sRGB Match@1931) | 95 | 100 | - | % | |||
| Response Time (Rising + Falling) | TRT | Ta= 25C Θ = 0. | - | 20 | 25 | ms | |
| Cross Talk | CT | Θ = 0. | - | - | 2.0 | % | |
Interface Connection:
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | NC | No Connection |
| 2 | H_GND | Ground |
| 3 | LANE1_N | eDP RX Channel 1 Negative |
| 4 | LANE1_P | eDP RX Channel 1 Positive |
| 5 | H_GND | Ground |
| 6 | LANE0_N | eDP RX Channel 0 Negative |
| 7 | LANE0_P | eDP RX Channel 0 Positive |
| 8 | H_GND | Ground |
| 9 | AUX_CH_P | eDP AUX CH Positive |
| 10 | AUX_CH_N | eDP AUX CH Negative |
| 11 | H_GND | Ground |
| 12 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 13 | LCD_VCC | Power Supply, 3.3V (typ.) |
| 14 | BIST | Panel Self Test Enable |
| 15 | H_GND | Ground |
| 16 | H_GND | Ground |
| 17 | HPD | Hot Plug Detect Output |
| 18 | BL_GND | LED Ground |
| 19 | BL_GND | LED Ground |
| 20 | BL_GND | LED Ground |
| 21 | BL_GND | LED Ground |
| 22 | BL_ENABLE | LED Enable Pin(+3.3V Input) |
| 23 | BL_PWM | System PWM Signal Input |
| 24 | NC | No Connection |
| 25 | NC | No Connection |
| 26 | BL_POWER | LED Power Supply 5V-21V |
| 27 | BL_POWER | LED Power Supply 5V-21V |
| 28 | BL_POWER | LED Power Supply 5V-21V |
| 29 | BL_POWER | LED Power Supply 5V-21V |
| 30 | NC | No Connection |
Handling Precautions:
1.As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible.
2.As the LCD panel and back - light element are made from fragile glass material, impulse and pressure to the LCD module should be avoided.
