|
[China]
Trade Verify
Address: Foor 2, 4th Buidling, A Zone, Xinhe Xinxing Industrial 3th Zone, Fuhai Avenue, Baoan, Guangdong, China.
Contact name:Catlin Zeng
Shenzhen Wofly Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Pressure Reducer Use Scenario, Mounted On The Cylinder With The Flow Meter One Use
Usage: Semiconductor, laboratory, industrial gas, etc.
There are 6 types of single-stage pressure regulators as follows:
General-purpose pressure regulators: These regulators are designed for use in a wide range of applications, such as air compressors, welding, and pneumatic systems. They are available in a variety of pressure ranges and flow capacities.
Gas pressure regulators: These regulators are designed for use with gases such as propane, natural gas, and compressed air. They are available in a variety of pressure ranges and flow capacities, and may be designed for use with specific gases.
Refrigeration pressure regulators: These regulators are designed for use in refrigeration systems, and are available in a variety of pressure ranges and flow capacities. They may be designed for use with specific refrigerants.
Medical gas pressure regulators: These regulators are designed for use in medical applications, such as oxygen therapy. They are available in a variety of pressure ranges and flow capacities, and may be designed for use with specific medical gases.
High-pressure regulators: These regulators are designed for use with high-pressure gases, such as hydrogen and nitrogen. They are available in a variety of pressure ranges and flow capacities.
Low-pressure regulators: These regulators are designed for use with low-pressure gases, such as propane and natural gas. They are available in a variety of pressure ranges and flow capacities.
Considerations for selecting a pressure regulator:
When selecting a single-stage pressure regulator, it is importantto consider the specific application and requirements of the system. Factors such as the type of gas or fluid being regulated, the pressure range and flow rate required, and the compatibility with the system materials should be taken into account. It is also important to ensure that the regulator meets any applicable safety standards and regulations for the intended use.
R11 series stainless steel pressure regulator, sinlge stage diphragm reducing structure, stainless steel diaphragm pressure transmit, stable outlet pressure, suitable for purity gas, standard gas and corrosive gas etc.
Technical parameters
| 1 | Maximum Inlet Pressure | 500,3000psig |
| 2 | Outlet Pressure Ranges | 0~25, 0~50, 0~50,0~250,0~500psig |
| 3 | Safety test pressure | 1.5 times maximum inlet pressure |
| 4 | Operating Temperature | -40°F to 165°F / -40°c to 74°c |
| 5 | Leakage Rate Against Atmosphere | 2*10-8atm cc/sec he |
| 6 | Cv value | 0.08 |
Material of Parts
| 1 | Body | 316L,Brass |
| 2 | Bonnet | 316L. Brass |
| 3 | Diaphragm | 316L |
| 4 | Strainer | 316L(10mm) |
| 5 | Seat | PCTFE,PTEE,Vespel |
| 6 | Spring | 316L |
| 7 | Plunger valve core | 316L |
ORDERING INFORMATION of Stainless Steel Pressure Regulator
| R11 | L | B | D | F | G | 00 | 00 | P |
| Item | Body Materia | Body Hole | Inlet pressure | Outlet pressure | Pressure gauge | Inlet size | Outlet size | mark |
| R11 | L:316 | A | D:3000 psi | F:0-500 psi | G:MPa gauge | 00:1/4 " NPT (F) | 00: 1/4 " NPT(F) | P:Panel mounting |
| B:Brass | B | E:2200 psi | G:0-250 psi | 01:1/4 " NPT (M) | 01: 1/4 " NPT(M) | N:Needle valve | ||
| D | F:500 psi | l:0-100 psi | P:Psig/bar gauge | 23: CGA330 | 10:1/8 " OD | N:Needle valve | ||
| G | K:0-50 psi | 24: CGA350 | 11:1/4 " OD | D:Diaphragm valve | ||||
| J | L:0-25 psi | W:No gauge | 28: CGA660 | 12:3/8 " OD | ||||
| M | 28: CGA660 | 15:6mm OD | ||||||
| 30: CGA590 | 16:8mm OD | |||||||
| 52: G5/8 "-RH(F) | ||||||||
| 63: W21.8-14H(F) | ||||||||
| 64: W21.8-14LH(F) |
FAQ
Q. Are you manufacturer?
A. Yes, we are manufacturer.
Q.What is lead time?
A.3-5days. 7-10 days for 100pcs
Q. How do I order?
A.You can order it from Alibaba directly or send us a inquiry. We
will reply you within 24 hours
Q. Do you have any certificates?
A.We have CE certificate.
Q. What materials do you have?
A.aluminium alloy and chrome plated brass are available. The
picture shown is chrome plated brass. If you need other material,
pls contact us.
Q. What is maximum inlet pressure?
A.3000psi (about 206bar)
Q. How do I confirm inlet connnection for cylidner?
A. Pls check cylinder type and confirm it. Normally, it is CGA5/8
male for Chinese cylinder. Other cylidner adapter are also
available e.g CGA540, CGA870 etc.
Q. How many types for connecting cylinder?
A.Down way and side way. (you can choose it)
Q. What is product warranty?
A: The free warranty is one year from the day of Commissioning
qualified.If there is any fault for our products within the free
warranty period, we will repair it and change the fault assembly
for free.
