|
[China]
Trade Verify
Address: Foor 2, 4th Buidling, A Zone, Xinhe Xinxing Industrial 3th Zone, Fuhai Avenue, Baoan, Guangdong, China.
Contact name:Catlin Zeng
Shenzhen Wofly Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
High Pressure Co2 Stainless Steel Pressure Regulator 4000psi Inlet Range
Product Description
Features of co2 gas cylinder air pressure regulator
Single-stage diaphragm structure
Corrugated diaphragm design for excellent
sensitivity and cycle life
Suitable for corrosive and toxic gases
20 μm fifilter element installed at inlet
Oxygen environment options are available
Pressure Regulator Operation
Regulators reduce the pressure of a gas or liquid from a source, such as a cylinder or compressor, to a lower value needed by a device, such as an analyzer. A pressure regulator provides better resolution and control when its inlet and control range pressures closely match the pressure requirements of the fluid handling system. Resolution is the number of handle turns needed to adjust a regulator from its lowest to highest outlet pressure setting. Control is the ability of the regulator to hold a given outlet pressure set point.
Technical Data of High Pressure Co2 Stainless Steel Pressure Regulator
| 1 | Max Inlet Pressure | 600psig, 3500psig | |
| 2 | Outlet Pressure Range | 0~30, 0~60, 0~100, 0~150, 0~250, 0~500 | |
| 3 | Component Material | Seat | PCTFE |
| Diaphragm | Hastelloy | ||
| Filter mesh | 316L | ||
| 4 | Working Temperature | -40℃～+74℃(-40℉～+165℉) | |
| 5 | Leak Rate (Helium) | Internal | ≤1×10 -7 mbar l/s |
| External | ≤1×10 -9 mbar l/s | ||
| 6 | Flow Coeffificient (Cv) | 3500psig Inltet | Cv=0.09 |
| 600psig Inltet | Cv=0.20 | ||
| Body Thread | Inlet port | 1/4NPT (EP 1 / 4 VCR optional) | |
| Outlet port | 1/4NPT (EP 1 / 4 VCR optional) | ||
| Pressure gauge port | 1/4NPT (EP 1 / 4 VCR optional) | ||
Ordering Information
| WR11 | ||||||
| Body Material | Inlet Pressure P1 | Outlet Pressure Range P2 | Porting | Connection 1/2/3/4 | Optional Feature | Product Grade |
| 316L SS | 3500 psig | 0-30 psig | 2 ports | 1/4" Female NPT | None | Standard(BA) |
| Hastelloy HCC-276 | 600 psig | 0-60 psig | 3 ports | 1/4" Male NPT | With a panel nut | Oxygen cea ning |
| 0~100 psig | 4 ports | 1/4" OD | ||||
| 0~150 psig | Other ports are available upon request | 3/8"OD | ||||
| 0-250 psig | 1/4" OD diaphragm valve | |||||
| 0-500 psig | 3/8" OD diaphragm valve | |||||
| 1 /4 "female VCR | ||||||
| 1 /4 "Male VCR | ||||||
| With gauge (psi/MPa) | ||||||
| CGA No. | ||||||
| DIN No. | ||||||
| Refer to the manual for cylinderconnections.Other connectionsare available upon request. | ||||||
FAQ
Q1: Is the flow rate of the pressure reducer adjustable?
A1: Yes, we can adjust it according to your needs and choose the model.
Q2: What products can you provide?
A2: We can supply pressure reducers (for inert, toxic and corrosive gases), diaphragm valves (Class BA and EP), couplings (VCR and conventional), needle and ball valves and check valves (ferrule, internal, external and G-tooth available), cylinder couplings, etc.
Q3: Can you provide samples to test? For free?
A3: We can provide free samples, and due to their high value, you should bear the cost.
Q4: Can you make the products based on our requests, such as connection, thread, pressure and so on?
A4: Yes, We have experienced techincal team and can design and produce the products according to your requirements. Take a pressure regualtor for example, we can set the range of pressure gauge according actual working pressure, if the regulator is connected to a gas cylinder, we can add an adaptor such as CGA320 or CGA580 to connect the regulator with the cylinder valve.
Q5: What payment methods for chose?
A5: For small order, 100% Paypal, Western Union and T/T in advance. For bulk purchase, 30%T/T, Western Union, L/C as deposit, and 70% balance paid before shipment.
Q6: How about the lead time?
A6: Usually, delivery time is 5-7 working days for sample, 10-15 working days for mass production.
