Active Member
|
[China]
Address: Building 4A, Cross-border E-commerce Industrial Park, Shiqiaopu, High-tech Zone, Mianyang City, SC, China
Contact name:Bruce Chiu
Mianyang Baoheng New Material Technology Co.,Ltd |
|
|
ASTM Grade 615 Stainless Steel Round Bar UNS S41800 12-2W Bar
Description
ASTM Grade 615 Stainless Steel Round Bar UNS S41800 12-2W Bar is most commonly used in low-stress and less demanding applications and makes an economical choice in situations where a tremendous level of tensile strength is not necessarily needed. Its strength and performance characteristics are grade-dependent.
All of ASTM Grade 615 Stainless Steel Round Bar UNS S41800 12-2W Bar conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
|
Products Details
ASTM Grade 615 Stainless Steel Round Bar UNS S41800 12-2W Bar
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): 0.15 ~ 0.20 Si (％): ≤ 0.50 Mn (％): ≤ 0.50 P (％)≤: 0.040 S (％)≤: 0.030 Cr (％): 12.0 ~ 14.0 Ni (％): 1.80 ~ 2.20 Mo (％): ≤ 0.50 W (％): 2.50 ~ 3.50 | Condition of heat treatment: Annealed Tensile strength, σb ≥/MPa: - Yield strength, σ0.2 ≥/MPa:- Elongation, δ ≥(％): - Reduction of area, ф ≥(％): - Hardness | HRS: ≤ 311 Condition of heat treatment: HT 981℃ ~ 1080℃ air or oil cooled, ≥620℃ X 2H, two times tempered Tensile strength, σb ≥/MPa: 965 Yield strength, σ0.2 ≥/MPa: 760 Elongation, δ ≥(％): 15.0 Reduction of area, ф ≥(％): 45.0 Hardness | HRS: 302 ~ 352 |
Applications:
ASTM Grade 615 Stainless Steel Round Bar UNS S41800 12-2W Bar used most often in the Ducts, Stiffeners, Exhaust struts, Engine braces, Turbine exhaust components, etc.
ASTM Grade 615 Stainless Steel Round Bar UNS S41800 12-2W Bar
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
