Active Member
|
[China]
Address: Building 4A, Cross-border E-commerce Industrial Park, Shiqiaopu, High-tech Zone, Mianyang City, SC, China
Contact name:Bruce Chiu
Mianyang Baoheng New Material Technology Co.,Ltd |
|
|
PH15-7Mo Stainless Steel Round Bar AISI 632 UNS S15700 Composition
Description
PH15-7Mo Stainless Steel Round Bar is a semi-austenitic precipitation-hardening stainless steel that provides high strength and hardness, good corrosion resistance and minimum distortion upon heat treatment. PH15-7Mo Stainless Steel Round Bar is easily formed in the annealed condition and develops an effective balance of properties by simple heat treatments. For applications requiring exceptionally high strength, cold-reduced PH15-7Mo Stainless Steel Round Bar in Condition CH 900 is particularly useful for applications permitting only limited ductility and workability.
All of PH15-7Mo Stainless Steel Round Bar AISI 632 UNS S15700 conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
PH15-7Mo Stainless Steel Round Bar AISI 632 UNS S15700
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
| C (％): ≤ 0.09 Si (％): ≤ 1.00 Mn (％): ≤ 1.00 P (％) ≤: 0.040 S (％) ≤: 0.030 Cr (％): 14.0 ~ 16.0 Ni (％): 6.50 ~ 7.70 Mo (％): 2.00 ~ 3.00 Al (%): 0.75 ~ 1.50 Co (%): - W (%): - | Condition: annealed Tensile strength, σb/≥ MPa: 1035 Yield strength, σ0.2/≥ MPa: 450 Elonghation, δ ≥(％): 25.0 Reduction of area, ф ≥ (％): - Hardness | HB: - |
Applications:
PH15-7Mo Stainless Steel Round Bar used most often in the Manufacturing aerospace thin-walled structural parts and various containers;Pipe, spring, diaphragm;Ship shaft, compressor disk;Reactor components;Structural parts such as various chemical equipment; etc.
PH15-7Mo Stainless Steel Round Bar AISI 632 UNS S15700 Composition
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of raw materials and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
