Wuhan Spico Machinery & Electronics Co., Ltd. |
Verified Suppliers
|
|
NM FIRE 2500 GPM Fire Fighting Water Pump Split Case Fire Pump UL Listed
UL/FM Fire Pump Performance Requirements:
The maximum net pressure for a fire pump shall not exceed 140 percent of rated head.
( Hs ≤ 140% x H)
Inlet pressure less than 047.7 kpa. A pump shall develop not less than 65 percent or rated
total head when discharging at 1-1/2 times rated. (H 1.5 Q ≥ H x 65%)
A test is to be conducted with a positive suction pressure sufficient to achieve the maximum
brake-horsepower(KW input)required by the pump. ( P ≥ BHP)
The shut off head shall not be less than 99% of the maximum head.
Main Configurations:
Type: | SCF250-200-500S |
Brand: | NM Fire |
Rated Flow: | 2500 GPM |
Rated Head: | 150 M |
Speed: | 2000 RPM |
Engine: | NM Fire NM8-128 |
Fuel Tank: | 2100L |
Control Panel: | Tornatech GPD24-120-220 |
Jockey Pump: | CDL32-130-2 |
Performance Curve:
Why NMFIRE pump BHP is smaller?
1:Best Hydraulic design
The Max. BHP point of new generation SCF pump is mostly near the maximum efficiency point
(near the 150% of Rated Flow point), while the Max. BHP of our competitors are mostly at 160%
to 170% of Rated Flow. So their matching power is mostly higher than ours.
2: High efficiency, reduce the matching power again.
3:Pump cavitation performance is very good, to ensure that the small size pump can be used for
big flow rate.
Service:
1. Reply within 24 hours. |
2. High-quality products and the most reasonable price |
3. Data and chemical technology support. |
4. Professional team service |
5. Customiszed production for different package |
6. No delay on shipment |