|
[China]
Trade Verify
Address: Rm. E, 16th FL., Century Bldg. No. 206, Jianghan Rd., Hankou, Wuhan, China
Contact name:Kathy Wong
Wuhan Spico Machinery & Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
NFPA20 Standard Diesel Engine Driven Fire Water Pump For Residential / Industrial
Parameters:
| Pump | NM Fire End Suction |
| Type | ESF65/26 |
| Speed | 2950rpm |
| Rated flow | 400gpm |
| Raged head | 80m |
| Engine | NM Fire NM4-105 (70kw) |
| Fuel tank | 400 L |
| Controller | Tornatech GPD24-220-C05 |
Applications:
The end suction centrifugal pump is useful in various residential, industrial and commercial applications. Due to the fact that the pumps are highly common and readily available from many suppliers, their prices are usually very attractive.
Standard end suction centrifugal water pumps are normally close coupled and manufactured from standard iron or a variety of plastics. Pumps that are meant for more heavy duty commercial and industrial applications are often mounted on a bedplate with a coupling that separates the motor and the pump.
These are usually available in stainless steel and more exotic alloys or plastics for corrosion resistance, while others are manufactured from hardened iron for mining, slurry and dredging applications.
Advantage:
First-Class testing and inspection equipment.
UL certification represents the world's highest technical standards of fire certification,but also means that certified fire products must withstand the most extreme,harsh test process,the purpose of certification designed to verify whether the product meets the performance,safety and quality requirements,so as to achieve the purpose of property protection.
NM fire obtained fire diesel engine UL1247 and fire pump UL448 witnessed laboratory accreditation,fully proved that the company in terms of hardware and software strength,are to meet the strict requirements of UL certification.
Performance Ranges:
UL:
| Q: 100-750GPM | H:100-145PSI |
FM:
| Q: 100-750GPM | H:100-145PSI |
CCCF:
| Q:5-150L/S | H:0.40-1.6Mpa |
NFPA20:
| Q: 100-2250GPM | H:60-230PSI |
Service:
| Pre-service |
| Introduce the product to the customer in detail,answer the question raised by customer carefully; |
| Sale service |
| 1.Ensure product with high quality and pre-commissioning before delivery; |
| 2.Delivery on time; |
| 3.Provide full set of documents as customer’s requirements. |
| After-sale service |
| Provide considerate services to minimize clients’ worries. |
