Active Member
|
[China]
Address: ZHONGXING EAST ROAD 208, XIKOU TOWN315502, FENGHUA CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Ricky
Ningbo Nijia Electronics Technology Co.,Ltd |
|
|
Goyen Cast Aluminum diaphragm valve CA62MM 2 1/2 " AC230V 50/60Hz pulse jet valve
Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning
including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
Constuction Material:
| Body | Aluminium (diecast) |
| Ferrule | 304 SS |
| Armature | 430FR SS |
| Seals | Nitrile or Viton (reinforced) |
| Spring | 304 SS |
| Screws | 302 SS |
| Clip | Mild steel (plated) |
| Locknut | Mild steel zinc passivated |
| Voltage | DC: 24V, AC: 24V,48V,110V,230V |
| Working Temperature | - 20 to + 85 ℃ |
| Protection Class | IP65 |
| Coil Insulation Class | F |
| Working Pressure | 0.35-0.85Mpa |
| Diaphragm Seat | PA-6 or Viton coated mild steel or High Density PE |
| Sealing & disc | CR (chloroprene) |
| Diaphragm | NBR(nitrile/buna-n) or Viton |
| Shading coil | Copper |
| Connector | DIN43650A |
INSTAllATION:
| 1 | The valves can be mounted in any position without affecting operation |
| 2 | Threaded pipe connection is: G = G (ISO 228/1) or compression fittings |
| 3 | Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself. |
| 4 | Apply moderate pressure to system and check for installation leaks. |
| 5 | For compression fitting types tightness is achieved by the compressed gasket on the blow tube |
| 6 | Other pipe threads are available on request |
| 7 | Installation/maintenance instructions are included with each valve |
| 8 | Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only). |
| 9 | Fully pressurise system. |
| 10 | Test fire and listen for proper actuation and crisp pulse noise. |
Maintenance:
Before conducting any maintenance activity on the system ensure
that components are fully isolated from
pressure and power supplies. Pressure and power should not be
reapplied until the valve has been fully assembled.
Diaphragm and pilot inspection should be conducted annually
Product show:
Fitted Repair kits code: Diaphragm K5000 / K5004(Vition)
