Ningbo Nijia Electronics Technology Co.,Ltd |
|
Goyen Aluminum Screw Remote pilot diaphragm valve RCA45DD 010-300 1 1/2 " pulse jet valve
Operation :
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Constuction Material:
Body | Aluminium (diecast) |
Seals | Nitrile or Viton (reinforced) |
Spring | 304 SS |
Screws | 302 SS |
Working Temperature | - 20 to + 85 ℃ |
Coil Insulation Class | F |
Working Pressure | 0.35-0.85Mpa |
Diaphragm Seat | PA-6 or Viton coated mild steel or High Density PE |
Sealing & disc | CR (chloroprene) |
Diaphragm | NBR(nitrile/buna-n) or Viton |
Shading coil | Copper |
Description
High performance diaphragm valve with threaded ports. Available
with integral pilot or as remotely piloted valve. Outlet at
90° to inlet.
INSTAllATION:
1 | For compression fitting types tightness is achieved by the compressed gasket on the blow tube |
2 | Other pipe threads are available on request |
3 | Installation/maintenance instructions are included with each valve |
4 | Spare parts kit and replacement coils are available |
5 | Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank. |
6 | Ensure tank and pipes are free from dirt, rust or other particulate. |
7 | Ensure supply air is clean and dry. |
8 | Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself. |
9 | Apply moderate pressure to system and check for installation leaks. |
10 | Fully pressurise system. |
Maintenance:
Before conducting any maintenance activity on the system ensure
that components are fully isolated from
pressure and power supplies. Pressure and power should not be
reapplied until the valve has been fully assembled.
Diaphragm and pilot inspection should be conducted annually
OPTIONS:
1 | Valves can also be supplied with FPM (fluorelastomer) diaphragms and seal materials. Use the appropriate optional suffix 'V' for identification |
2 | Sequential controller for pilot solenoid valves |
3 | Pilot boxes containing 2 to 12 pilot solenoid valves |
4 | Pilot solenoid valves can be equipped with explosionproof solenoids for hazardous locations according to “ATEX” and national standards |
Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning
including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
DIMENSIONS (mm) :
Product show:
Fitted Repair kits code: Diaphragm K4502 / K4503(Vition)