Semi-automatic testing machine 829 Tube IC Burner
Introduction to KINCOTO Tube IC Automatic Burner:
Semi-automatic testing machine is mainly designed for testing ICs
of factories and design companies. This scheme has solved the
defects of low efficiency and high defective rate in most of
factories who use artificial burning at present, and meets the
requirements of factories and design companies on the cost of
production tools. At present, our company is mainly equipped with
DIP300mil, SOP300mil, SOP150mil, SSOP300mil, SSOP150mil,
SSOP210mil, TSSOP173mil and other IC packaging testing machines.
Main Features of KINCOTO Tube IC Automatic Burner:
1. Eight ICs to be tested can be put into a feed tube every time,
forming nine discharge tubes.
2. After the completion of testing, the burnt ICs, namely two
discharge tubes, are classified according to OK and NG signals
given by a tester.
3. The parameters of the machine are convenient to adjust.
According to appropriate parameters, the machine can run more
smoothly, and the production efficiency can be improved.
4. Before delivery, parameters set by the machine are suitable for
most of burning devices. Parameters before delivery can be
recovered when the set parameters cannot ensure smooth operation of
the machine.
5. Due to the differences of packaging, the IC quantity of every
tube can be set when the tube is full.
6. When testing NG occurs, another testing should be conducted
again. NG can only be determined when it occurs for two times.
7. The OK and NG quantity in the process of testing ICs can be
recorded. The quantity cannot be lost after power failure,
facilitating in production management.
8. The machine is equipped with an LCD for displaying, as well as a
friendly user interface.
9. It is suitable for testing ICs of many customers, with a wide
application range.
10. The machine is prevented from using air sources, is convenient
to use, and can burn two ICs at a time, which improves the
production efficiency substantially.
