Semi-automatic burning machine is mainly designed for burning ICs
of factories and design companies.
Introduction to KINCOTO Tube IC Automatic Burner:
Semi-automatic burning machine is mainly designed for burning ICs
of factories and design companies. This scheme has solved the
defects of low efficiency and high defective rate in most of
factories who use artificial burning at present, and meets the
requirements of factories and design companies on the cost of
production tools. At present, our company is mainly equipped with
DIP300mil, SOP300mil, SOP150mil, SSOP300mil, SSOP150mil,
SSOP210mil, TSSOP173mil and other IC packaging burning machines.
ICs from different manufacturers can be burned when programmers of
different manufacturers are replaced. Two ICs can be burnt at a
time, which can be set.
Main Features of KINCOTO Tube IC Automatic Burner:
1. An IC to be burned can be put into a feed tube every time.
2. After the completion of burning, the burnt ICs, namely two
discharge tubes, are classified according to OK and NG signals
given by a burning device.
3. The parameters of the machine are convenient to adjust.
According to appropriate parameters, the machine can run more
smoothly, and the production efficiency can be improved.
4. Before delivery, parameters set by the machine are suitable for
most of burning devices. Parameters before delivery can be
recovered when the set parameters cannot ensure smooth operation of
the machine.
5. Due to the differences of packaging, the IC quantity of every
tube can be set when the tube is full.
6. When burning NG occurs, another burning should be conducted
again. NG can only be determined when it occurs for two times.
7. The OK and NG quantity in the process of burning ICs can be
recorded. The quantity cannot be lost after power failure,
facilitating in production management.
8. The machine is equipped with an LCD for displaying, as well as a
friendly user interface.
9. It is suitable for burning ICs of many customers, with a wide
application range.
10. The machine is prevented from using air sources, is convenient
to use, and can burn two ICs at a time, which improves the
production efficiency substantially.
