Active Member
|
[China]
Address: No.28, Chengwen West Road, Gaocheng Town, Yixing City, Jiangsu Province, China
Contact name:Ye Bing
Jiangsu Longdai Environmental Protection Co., Ltd. |
|
|
Stainless steel chain traction mud scraper manufacturer Chain plate sludge scraper for sedimentation tank
The chain type mud scraper is mainly used to scrape and remove the
sediment at the bottom of the horizontal (rectangular)
sedimentation tank, especially the sedimentation tank, oil
separator, primary sedimentation tank and other rectangular tanks
in the sewage treatment project. It can also skim the floating oil
and scum on the liquid surface. The chain type mud scraper has
simple structure, one machine is multi-purpose, convenient
installation, operation and maintenance, safe and reliable
operation, etc.
Structural Composition
The chain plate skimmer, sand scraper, mud scraper and slag skimmer
are mainly composed of the deceleration drive device fixed on the
ground, the traction chain with scraper set in the pool, the drive
sprocket pair, the tensioning device and the safety protection
device.
Working Principle
The decelerating drive device of the chain plate type mud scraper
transmits the power to the drag chain through the chain wheel pair
to drive the scraper to rotate directionally and continuously along
the upper and lower guide rails of the pool. During the operation,
the scraper scrapes the sand on the pool floor and the oil sludge
on the pool surface to the sludge collecting tank and the slag
discharge pipe to discharge them out of the pool.
Equipment Characteristics
1. The special chain is used for reliable transmission.
2. Waterproof bearing is adopted, with long service life.
3. The structure is reasonable and the operation is stable.
4 Sand scraping is complete and efficient.
5. The moving speed of the scraper is moderate, which has little
disturbance to the sewage and is conducive to the sedimentation of
suspended solids.
6. The scraper makes continuous rotary movement in the pool without
reversing. The drive device is located on the platform on the top
of the pool, so power distribution and maintenance are very simple
7. It can also be used as slag skimmer without additional
mechanism.
Parameter
| Model Number / Parameters | ZBG-16 | ZBG-20 | ZBG-25 | ZBG-30 | ZBG-35 | ZBG-40 | ZBG-45 | ZBG-50 | ZBG-55 | |
| Pool diameter Φ(m) | 16 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | |
| Deep pool depth H(m) | 3.5～4.5(According to the user's requirements) | |||||||||
| Pool side water depth H2(m) | 3.0～4.0(According to the user's requirements) | |||||||||
| Around the line speed v(m／min) | 2.0~3.0 | |||||||||
| Walking wheel dimensions (mm) | Φ400x120 | Φ120x450 | ||||||||
| power of motor N(KW) | 0.37 | 0.55 | 0.75 | |||||||
| installation size (mm) | Φ1 | 1100 | 1100 | 1200 | 1200 | 1500 | 1500 | 1800 | 1800 | 1800 |
| Φ2 | 2500 | 2500 | 2500 | 3500 | 4000 | 4500 | 5000 | 5500 | 6000 | |
| Φ3 | 2600 | 3000 | 3800 | 4500 | 4500 | 5000 | 5000 | 6000 | 6000 | |
| Φ4 | 2100 | 2300 | 3500 | 4000 | 4000 | 4000 | 4500 | 4500 | 4500 | |
| H2 | 500 | 500 | 600 | 760 | 760 | 760 | 760 | 760 | 760 | |
| B | According to the user's requirements | |||||||||
| H3 | According to the user's requirements | |||||||||
| L | According to the user's requirements | |||||||||
| Around the wheel pressure P1(KN) | 9.0 | 11.5 | 15 | 19 | 22 | 25 | 28 | 30 | 32 | |
| Vertical load of the central platform P2(KN) | 17 | 23 | 30 | 37 | 82 | 100 | 112 | 122 | 175 | |
| Center load of center load P3(KN) | 9.5 | 13 | 17 | 22 | 28 | 28 | 30 | 32 | 40 | |
