Sinuo Testing Equipment Co. , Limited |
Verified Suppliers
|
|
Vertical Impact Test Equipment Tests For Resistance To Impact IEC 60079-0 Figure A.3
Product Information:
Samples and restrictions: Cable entry devices for explosion-proof products, housings for explosion-proof products.
Test purpose: used to test the impact resistance of the cable entry
device of explosion-proof products or the shell of explosion-proof
products, and evaluate the impact resistance of the product.
Test principle: According to the test Ehc: vertical drop weight,
the Φ25mm impact element with a weight of 1kg falls freely through
the conduit at a certain height and hits the sample in the vertical
direction. After the conversion of gravity potential energy into
kinetic energy, the purpose of impact testing on the sample is
achieved.
Equipment structure and features: beam-type frame, the hammer head
is manually moved to the release position, the electromagnet
releases the impact element, and the drop impact height is fixed
through the conduit.
Technical Parameters:
Impact energy/J | Calculated according to height: E=G=mgh |
Impact element | The front end is a hard hemisphere (Φ25mm±0.05mm), 1 kg |
Catheter | With gap between impact element |
Impact height | 100-2000mm, manually adjustable |
The impact height and energy selection method is as shown in Table 15. | |
Structural schematic diagram | |
Release method | Electromagnet release |
Base plate | Steel plate 1000mm×1000mm |
Fixture | Fixture pressing block 2 pcs |