Hot air enters the stirring, crushing and drying chamber in a
certain speed from the air inlet that at the bottom of dryer and
produces vigorous eddy airflow. Material is acted by centrifugal
force, shearing force, impact and friction, the particle size of
material becomes very small and mass and heat transmission is
strengthened. At the bottom of dryer, big damp granules is crushed,
small and low moisture content granules rise with the rotating air
stream. During the rising process, the granules are dried
further. Because of the rotary flow of air and solid, inertia of
solid phase is higher than gaseous phase, the relative speed of
air and solid is big, it strengthens mass and heat transmission, so
drying intensity is high.
1 .Several feeding device can be chose, feeding is continuous and
stable, no phenomenon of bridging.
2. There is special cooling device at the bottom of dryer, it can
avoid the material that in the bottom high temperature area be bad.
3.There is special air sealing device and cooling device for
bearing, it can make the life of transmission part longer
effectively.
4. There is special air distributing device, it can reduce the
resistance of equipment, and make the air speed in drying tower
become balance.
5. There is classify ring and turbojet plate, the fineness and
final moisture of product can be adjusted and controlled.
6. Circumference air speed in the drying tower is high, the
residence time of material is short, it can avoid the material
stick on the wall and thermal sensitive materials go bad.
3.Typical application:
Fire retardant, molecular sieve, rubber and plastic assistance,
pesticide, pigment, dyestuff, fine chemicals, feedstuff,
pharmaceutical and part intermediate industries.