Active Member
|
[China]
Address: 5th Floor, B2 Building Research Center Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, Guangdong Province.
Contact name:Violet
GENITEC DONGGUAN CO.,LTD |
|
|
2.2KW USB Program PCB Cutting Machine CCD Alignment AC Servo Motor
PCB Cutting Machine Descriptions
1.Equipped with high-speed CCD vision alignment system in all series of products to enhance
the precision in cutting and efficiency in operation.
2.Use high speed spindle with small cutting stress to precisely cut
any shape of PCBA.
3.Provide dual worktables for placing the cutting PCB in parallel
to enhance the efficiency of operation.
4.Patented dust collector with low noise and high efficiency.easy
to clean and maintain.
5.Operation system:adopts Lenovo+Windows10.
6.Software:Genitec independent research and development control
system supports unlimited ungrade.
PCB Cutting Machine Specification
| ITEM | GAM320A |
| Valid Cutting Area | 350*300mm |
| Cutting Function | Tweening to Line,L-Shape,U-shape,Circle,Arc |
| Process Table | Dual Tables |
| Repeat Precision | ±0.01mm |
| Cutting Precision | ±0.05mm |
| Max.Moving Speed | XY:1000mm/sec,Z:500mm/sec |
| Max.Moving Trip | X:775mm,Y:330mm,Z:90mm |
| Spindle Speed | MAX60,000rpm |
| Voltage/Power Requirement | AC220V 50/60HZ 2.2KW Single Phase |
| Cutting Speed | 1-100mm/s Adjustable |
| Operation System | Windows10 |
| Program Teaching Method | Intuitive Teaching by CCD Color Image Input |
| Program Backup | USB |
| Control Method | Precision Multi-axis Control System |
| XYZ-Axis Driving Mode | AC Servo Motor |
| Size of Millng Bit | φ0.8-3.0mm |
| Machine Dimension | 1285w*1340D*1490H(mm) |
| Machine Weight | 530KG |
| Dust Collector | TS200 |
PCB Cutting Machine Application
1. Equipped with high efficient vision-aided position alignment
system with high-speed CCD camera
in all product series .Especially desinged for high-precision and high-production PCB cutting process.
2. Suitable for de-paneling small-sized PCB for cell phone ,digital
camera,GPS device,and PDA ,etc.
3. Can choose either standard fixture or customized fixture for PCB
cutting to help increasing the production volume.
4. Provide dual worktables so that placing and cutting PCB can be
performed simultane-ously to minmize the waiting time.
Power Control
1. The integrated module board, simple maintenance, and the acrylic protection cover of the wiring terminal
is in compliance with safety regulations.
2. All signal lines have line codes. When the machine fails,
corresponding codes will appear ,it is for easy maintenance.
3. Servo adopts Japanese Panasonic series.
Limit inductor
Japan omron inductor series, high versatility, reliable quality, horizontal installation to avoid foreign matter triggered by the wrong action.
Air Part
1, The intake air adopts 40u+10u two-stage filtration and automatic drainage to ensure the cleanness
of the air source to prolong the life of the pneumatic components, ensure the cooling of the main shaft
cooling gas source and extend the service life of the main shaft.
2, Adopts Taiwan AIRTAC the magnetic valve,quality assurance.
