GENITEC DONGGUAN CO.,LTD |
|
2.2KW Single Phase PCB Separator CCD Vision Alignment 500mm/ Sec
PCB Separator Descriptions:
Equipped with high-speed CCD vision alignment system in all series
of products to enhance the precision in cutting and efficiency in
operation.
Use high speed spindle with small cutting stress to precisely cut
any shape of PCBA.
Provide dual worktables for placing the cutting PCB in parallel to
enhance the efficiency of opration.
Patented dust collector with low noise and high efficiency.easy to
clean and maintain.
Operation system:adopts Lenovo+Windows10.
Software:Genitec independent research and development control
system supports unlimited ungrade
PCB Separator Specification
ITEM | ZM320 |
Valid Cutting Area | 350*300mm |
Cutting Function | Tweening to Line,L-Shape,U-shape,Circle,Arc |
Process Table | Dual Tables |
Repeat Precision | ±0.01mm |
Cutting Precision | ≦±0.05mm |
Max.Moving Speed | XY:1000mm/sec,Z:500mm/sec |
Max.Moving Trip | X:810mm,Y:370mm,Z:90mm |
Spindle Speed | MAX60,000rpm |
Voltage/Power Requirement | AC220V 50/60HZ 2.2KW Single Phase |
Cutting Speed | 1-100mm/s Adjustable |
Operation System | Windows10 |
Program Teaching Method | Intuitive Teaching by CCD Color Image Input |
Program Backup | USB |
Control Method | Precision Multi-axis Control System |
XYZ-Axis Driving Mode | AC Servo Motor |
Size of Millng Bit | φ0.8-3.0mm |
Machine Dimension | 1245w*1315D*1550H(mm) |
Machine Weight | 500KG |
Dust Collector | TS200 |
Limit inductor
Japan omron inductor series, high versatility, reliable quality, horizontal installation to avoid foreign matter triggered by the wrong action.
PCB Separator Application:
1. PCB Separator is equipped with high efficient vision-aided
position alignment system with high-speed CCD camera in all product
series .Especially desinged for high-precision and high-production
PCB cutting process.
2. PCB Separator is suitable for de-paneling small-sized PCB for
cell phone ,digital camera,GPS device,and PDA ,etc.
3. Can choose either standard fixture or customized fixture for PCB
cutting to help increasing the production volume.
4. Provide dual worktables so that placing and cutting PCB can be
performed simultane-ously to minmize the waiting time.
Air Part
1, The intake air adopts 40u+10u two-stage filtration and automatic
drainage to ensure the cleanness of the air source to prolong the
life of the pneumatic components, ensure the cooling of the main
shaft cooling gas source and extend the service life of the main
shaft.
2, Adopts Taiwan AIRTAC the magnetic valve,quality assurance.
Power Control
1. The integrated module board, simple maintenance, and the acrylic
protection cover of the wiring terminal is in compliance with
safety regulations.
2. All signal lines have line codes. When the machine fails,
corresponding codes will appear ,it is for easy maintenance.
3. Servo adopts Japanese Panasonic series.