Active Member
|
[China]
Address: No.53 HuFan Lane, No.9088, HuTai Rd, Shanghai
Contact name:xie
Shanghai Schneider-Sunshine Mechanical Group Co.,Ltd. |
|
|
20.1~27.7m³/min Two Stage Screw Air Compressor 160KW Air Cooling Water cooling
⊙ why choose us
Longer service life of the master machine
The rotor uses asymmetrical line running at a
low speed with the support of the ball bearings and roller bearings
as a result. The damage and the cost are lowered and the service
life is extended. Some force is counteracted by the axial force
generated by the bevel gear. So the load on the bearings of the
master machine is lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC
series compressor can integrate the electromotor with flange, shaft
coupling box-gear box. and the master machine into one in such way
the master machine and the electrometer are aligned forever in the
transpiration. The SRC series compressors equipped with effective
and fully sealed air-cooling electromotor.
⊙ Type air compressor pause
| Specifacation | Cooling Style | Air Capacity (m³/min) | Discharge Pressure (bar) | Motor Power (kw) | Oil Content | Cooling Air Capacity (m3/min) | Cooling Water Capacity (m3/h) | Joint pipe Size (inch) | Total Weight (kg) | Dimension (L*W*H) (mm) |
| SRC-100SA/SW | Air cooling Water Cooling | 13.6 | 7 | 75 | 1~3ppm | 400 | 5 | 2″ | 1850 | 1900*1240*1700 |
| 13 | 8 | |||||||||
| 11.6 | 10 | |||||||||
| 10 | 13 | |||||||||
| SRC-120SA/SW | Air cooling Water Cooling | 16 | 7 | 90 | 1~3ppm | 400 | 6 | DN80 | 2100 | 2640*1540*1880 |
| 15.5 | 8 | |||||||||
| 14 | 10 | |||||||||
| 11.5 | 13 | |||||||||
| SRC-150SA/SW | Air cooling Water Cooling | 20.8 | 7 | 110 | 1~3ppm | 600 | 8 | DN80 | 2580 | 2640*1540*1880 |
| 19.5 | 8 | |||||||||
| 17.5 | 10 | |||||||||
| 15.5 | 13 | |||||||||
| SRC-175SA/SW | Air cooling Water Cooling | 24 | 7 | 132 | 1~3ppm | 630 | 9 | DN80 | 2700 | 2640*1500*1880 |
| 23 | 8 | |||||||||
| 20 | 10 | |||||||||
| 18 | 13 | |||||||||
| SRC-200SA/SW | Air cooling Water Cooling | 27.7 | 7 | 160 | 1~3ppm | 850 | 10 | DN80 | 3200 | 2640*1540*1880 |
| 26.5 | 8 | |||||||||
| 22.5 | 10 | |||||||||
| 20.1 | 13 | |||||||||
| SRC-250SA/SW | Air cooling Water Cooling | 32.5 | 7 | 180 | 1~3ppm | 850 | 12 | DN100 | 3700 | 3150*1830*1900 |
Contact With The Western Par
Schneider Risheng air compressor standard oil,
can reduce maintenance costs!
It has low foaming, low volatility, strong anti
emulsification, high oxidation resistance, good anti-wear and
lubricity, foam resistance and water separation. High stability can
significantly prolong the service life, reduce maintenance cycle
and oil change cycle, and save machine maintenance cost.
Schneider Risheng Air Compressor Standard Oil,
you are not responsible for buying expensive! Save time and effort!
Correct use of lubricating oil, prolong oil
change cycle, reduce shutdown time and save labor costs.
Schneider Risheng Air Compressor Standard Oil,
Safety and Guarantee!
Equipment oil requirements are very high, if
the price is cheap to buy non-standard oil or recycled oil, it will
not pay off.
Schneider Risheng air compressor oil technology
is good, no matter how high and special requirements can also meet!
For many years, the R&D team of air
compressor oil can meet the strict and special requirements for oil
use as long as they call us.
Features:
Energy Efficient
Unique N power rotors for maximum air flow and minimum power consumption.
Efficient Coupling
Air end and motor shafts are coupled through a permanently aligned cushion type flexible coupling. ELGI's efficient coupling ensures efficient power transmission and constant FAD throughout the life.
Efficient Oil Separation through OSBIC
ELGI has perfected the "OSBIC" (Oil Separation by Impact and centrifugal action) process which enables efficient separation of air and oil with minimum pressure drop. The process results in low oil carry-over(< 2 ppm) level at the output of the compressor.
