|
[China]
Trade Verify
Address: Shengang Metropolitan Plaza, Xinwu District, Wuxi, China
Contact name:Ruth
Wuxi Wondery Industry Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Vacuum Pressure Impregnation Equipment for Motors , Vacuum Impregnation Process (VPI)
1. Features
The vacuum pressure impregnation process (VPI) employs a process of vacuum and pressurizing.
The resin storage tank shell is set with a chilling and heating coil filled with glycol water solution.
The temperature is automatically controlled. Also the resin storage tank is set with a mixing device.
And the top of the storage tank is set with an anti-explosion lamp and an observation window. And the
outside of the tank is heat preserved by high temperature rock wool, and then further covered by
a stainless steel shell.
2. Supply Scope
| Vacuum pressure impregnation process tank, 1 set (vertical type); |
| resin storage tank, 1 set (vertical type); |
| vacuum system, 1 set; |
| vacuum buffer system, 1 set; |
| magnetic filtration system, 1 set; |
| resin supply and return system, 1 set; |
| hydraulic system, 1 set; |
| pressurizing system, 1 set; |
| pneumatic system, 1 set; |
| chilling and heating system, 1 set; |
| ventilation and discharge system, 1 set; |
| control and measurement system, 1 set; |
3. Main Technical Parameters
Vacuum pressure impregnation equipment tank size: Φ2500×h3000mm; storage tank size (vertical): Φ2500×h3000mm; storage tank design temperature: 0～80℃ storage tank working temperature: 5～50℃ impregnation tank extreme vacuum (cold status and empty load): 10Pa leak rate: ≤0.133pa.m3/s vacuum impregnation tank working vacuum degree: ≤70pa (or resin saturation steam pressure) working pressure: 0-0.60Mpa.
|
4. Company Information
Our company is specialized in designing and manufacturing industrial equipment, and providing excellent
pre-sales and post-sales service of various industrial machinery. The company mainly supplies the following
products: VPI series vacuum pressure impregnation equipment, FGH vacuum impregnation drying machine,
vacuum pressure impregnation equipment, water-curtain type paint spraying chamber, assembly conveyance
line, energy-saving drying ovens, baking ovens, and others.
5. Applications
The vacuum impregnation system are widely used for impregnation treatment of windings of motors,
electrical equipment, high voltage motors, traction motors, special motors, pump motors, magnetic
motors, and transformers. The equipment is a newly energy-saving equipment, which greatly improves
product quality, reduces production cost, and strengthens competitiveness.
Youtube link of Vacuum Pressure Impregnation Equipment
https://youtu.be/EWkfmRQbxHE
Vaccum Pressure Impregnation System
6. Vacuum impregnation waste gas treatment equipment
The activated carbon adsorption purification designs the environmental protection treatment system according to
the waste gas temperature, waste gas concentration, emission, waste gas type and national emission standards
provided by the user. Due to the high concentration and temperature of waste gas, and considering the low operation
cost and the adsorption of organic waste gas by activated carbon, the granular activated carbon adsorption recovery
device is generally selected as the main equipment. The working principle of activated carbon bed is divided into
two parts. One is adsorption, The second is desorption regeneration. After the waste gas is cooled by the gas
cooler, the gas enters the activated carbon box. After being adsorbed by the activated carbon in the box, the
harmful components are removed, and the purified gas meeting the emission standard is discharged to the outside
through the fan. The activated carbon adsorbs a certain solvent for a period of time (the length of use depends on the
content of the gas and the length of production time). It should be regenerated. During regeneration, 0.07 MPa steam
is sprayed into the adsorption box, Evaporate all kinds of solvents adsorbed in the activated carbon, condense them
into liquid through the condenser, and enter the separation cylinder to separate and recover the organic solvent. The
residual liquid enters the aeration cylinder. If the temperature of the waste gas is high, it will affect the adsorption
effect of the activated carbon. Therefore, before adsorption, conduct the waste gas cooling device to reduce the
temperature to about 40 ℃, and the cooled waste gas finally goes to the adsorption tank. The cooled gas enters
the activated carbon adsorption bed with an air volume of 3000m3, The flow velocity in the activated carbon layer
is less than 0.70 M / s, which can ensure the adsorption effect of activated carbon.
Activated carbon treatment process flow:
