|
[China]
Trade Verify
Address: Shengang Metropolitan Plaza, Xinwu District, Wuxi, China
Contact name:Ruth
Wuxi Wondery Industry Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Aluminum Castings Vacuum Pressure Impregnation Equipment Max Dia
1500 mm
Application
The vacuum pressure impregnation equipment is a right solution
to leakage problem of castings. The vacuum impregnation equipment
pressurizes the sealant to enter the porosities of castings, and
then cures them. The castings are sealed, and qualified to contain
liquids or gas.
The vacuum pressure impregnation equipment for castings are widely
used at military, automobile, ships, and other relevant fields.
The equipment is the most ideal equipment for solving leakage
problem.
The equipment is mainly used for leakage repair of castings,
sealing of porous powder metal products after sintering,
improvement of insulation property of electrical components, and
pre-treatment before galvanizing and plating.
Supply Scope
| impregnating tank: 1 piece |
| sealant storage tank, 1 piece |
| refrigeration device, 1 set |
| centrifugal swing dryer, 1 piece |
| wash tank, 1 piece (2 grades) |
| hot water cure tank, 1 piece |
| vacuum pump, 1 set |
| drain tank, 1 piece |
| basket, 8 pieces |
control cabinet, 1 set |
| pneumatic system, 1 set |
| pipes and valves, 1 set |
| working platform: 1 set |
| paint color: red or otherwise required by the customer |
Technical Parameters
| Item | 600 | 800 | 1000 | 1200 |
| Effective Size (mm) | 600 | 800 | 1000 | 1200 |
| Effective Height (mm) | 700 | 1000 | 1250 | 1500 |
| Working Pressure(Mpa) | 0.5 | 0.5 | 0.5 | 0.5 |
| Vacuum Degree (Pa) | <100 | <100 | <200 | <200 |
| Overall Height (mm) | 1300 | 1500 | 1800 | 2000 |
Note: The vacuum impregnation equipment is non-standard, and we
could provide the equipment according
to buyer’s specific requirement.
The loading basket could be square or round in shape.
Picture of Vacuum Pressure Impregnation Equipment
