|
[China]
Trade Verify
Address: Changjiang South Road, No.17-17, Wuxi, Jiangsu 214000, CN
Contact name:Rona
WUXI WANLI ADHESION MATERIALS CO., LTD. |
|
Verified Suppliers
|
|
|
Factory Direct High Quality Car Floor Mats Bonding PSA Hot Melt Adhesive WANLI® TPR-7217A Yellow Solid Block with Viscosity About 18000mpa·s (180℃) And High Viscosity, High Peeling Strength, Good Aging Resistance
Wanli® pressure sensitive hot melt adhesive TPR-7217A for vehicle
interior decoration is a TPR(Thermoplastic Rubber) synthetic rubber
based hot melt adhesive. TPR-7217A is specifically developed for car floor mats lamination. TPR-7217A is featured high viscosity, high peeling strength, good aging
resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-7217A is used
for car floor mats lamination bonding.
| Application Material | Car Floor Mats Lamination Bonding |
| Appearance | Yellow Solid Block |
| Component | TPR |
| Application Industry | PSA Hot Melt Adhesive for Vehicle Interior Decoration |
| Solid Content | 100% |
| Operating Temperature | 160～180 ℃( Depend On Equipment, Substrate, Environment And Other Conditions) |
| Softening Temperature | About 125℃ |
| Melt Viscosity | About 18000mpa·s (180℃) |
| Peeling @180˚ | About 32N/2.5cm/45-55μm on Stainless Steel Plate |
| Usage Scope | Car Floor Mats Lamination Bonding |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
It is suitable for standard hot melt adhesive application equipment
such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~180℃, which depends
on the equipment, substrate and environment and other conditions.
STORAGE
Store tWanli® PSA hot melt adhesive TPR-7217A where it’s dry, cool and avoid direct sunlight. The storage
temperature should be no more than 35℃ and avoid open fire or heat
source.
