|
[China]
Trade Verify
Address: Changjiang South Road, No.17-17, Wuxi, Jiangsu 214000, CN
Contact name:Rona
WUXI WANLI ADHESION MATERIALS CO., LTD. |
|
Verified Suppliers
|
|
|
Good Quality Factory Directly Yellowish Transparent Block Pressure Sensitive Hot Melt Adhesive WANLI® TPR-6136B-S1 with Viscosity About 16000mpa·s (180℃) for Car Wiring Harness Assembly Bonding
Wanli® pressure sensitive hot melt adhesive TPR-6136B-S1 for vehicle interior decoration is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-6136B-S1 is developed for car wiring harness assembly bonding. TPR-6136B-S1 is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-6136B-S1 is used for car wiring harness assembly bonding.
| Application Material | Car Wiring Harness Assembly PSA Hot Melt Adhesives |
| Appearance | Yellowish Transparent Block |
| Component | TPR |
| Application Industry | PSA Hot Melt Adhesive for Vehicle Interior Decoration |
| Solid Content | 100% |
| Operating Temperature | 160℃～185℃( Depend On Equipment, Substrate, Environment And Other Conditions) |
| Softening Temperature | Around 127℃ |
| Melt Viscosity | Around 16000mpa·s (@180℃) |
| Peeling @180˚ | ≥27N/2.5cm(at 23℃ and 50-55μm on Stainless Steel Plate/PET) |
| Odor Grade | ＜Grade 4.0 (@80℃) |
| Lasting Adhesive | ≥72H/50-55μm |
| Usage Scope | Wiring Harness Assembly Bonding During Production of Car |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-6136B-S1 is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~185℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store TPR-6136B-S1 where it’s dry, cool and avoid direct sunlight. The storage temperature should be not more than 35℃ and away from open fire or heat source.
