|
[China]
Trade Verify
Address: Baiyun District, Guangzhou City, Guangdong Province, China
Contact name:Yang Aijun
Guangzhou Bogeman Mechanical Seal Co., Ltd. |
|
Verified Suppliers
|
|
|
MG13 G6 G60 Bergman Type Industrial Mechanical Seals SUS304 Spring Holder
MG13 G6 G60 Bergman Mechanical Seals Holder
Model NO.
MG13
Type
MG13
Balance
Unbalanced
Rotary Ring
Ceramic/Sic
Stationary Ring
Plastic Carbon/Carbon/Sic
Spring
SUS304/SUS316
Secondary Seal
NBR/EPDM/HNBR/
Trademark
Bergman
Transport Package
Carton
Specification
12mm to 100mm
Origin
China
HS Code
84842000
Our Mechanical seal model MG13 can Replace AESSEAL B013, BURGMANN
MG13 FLOWSERVE 193 and MTU FG3,which is
widely used for Hecker HN 41ONU and other kinds of pumps. we
usually us seat type G6 for match it. The normal material
combination include carbon/ceramic/nbr/ss304,resin
carbon/ceramic/nbr/ss304/,sic/sic/nbr/ss304,tc/tc/nbr/ss316 and so
on.
we also can make changes as customers'requirement or totally
totally design a new type of mechanical seal to meet clients'needs.
Operating Limits:
Pressure: | <1.2MPa |
Speed: | <10m/s |
Temperature: | -20C~+180C |
● Stationary Ring(Ceramic/SiC/SiC)●Rotary Ring(Carbon/SiC)
● Secondary Seal(NBR/EPDM)
● Retainer(SUS304/SUS316). Spring(SUS304/SUS316)
● Spring Holder(SUS304/SUS316)
d1 | d3 | d7 | l3 | l28 |
10 | 22.5 | 21 | 33.4 | 6.6 |
12 | 25 | 23 | 33.4 | 6.6 |
14 | 28.5 | 25 | 33.4 | 6.6 |
15 | 28.5 | 27 | - | - |
16 | 28.5 | 27 | 33.4 | 6.6 |
17 | 32 | 33 | - | 7.5 |
18 | 32 | 33 | 37.5 | 7.5 |
19 | 37 | 35 | - | 7.5 |
20 | 37 | 35 | 37.5 | 7.5 |
22 | 37 | 37 | 37.5 | 7.5 |
24 | 42.5 | 39 | 42.5 | 7.5 |
25 | 42.5 | 40 | 42.5 | 7.5 |
28 | 49 | 43 | 42.5 | 7.5 |
30 | 49 | 45 | 42.5 | 7.5 |
32 | 53.5 | 48 | 47.5 | 7.5 |
33 | 53.5 | 48 | 47.5 | 7.5 |
35 | 57 | 50 | 47.5 | 7.5 |
38 | 59 | 56 | 46 | 9 |
40 | 62 | 58 | 46 | 9 |
42 | 65.5 | - | - | 一 |
43 | 65.5 | 61 | 51 | 9 |
45 | 68 | 63 | 51 | 9 |
48 | 70.5 | 66 | 51 | 9 |
50 | 74 | 70 | 50.5 | 9.5 |
53 | 78.5 | 73 | 59 | 11 |
55 | 81 | 75 | 59 | 11 |
58 | 85.5 | 78 | 59 | 11 |
60 | 88.5 | 80 | 59 | 11 |
65 | 93.5 | 85 | 69 | 11 |
68 | 96.5 | 90 | 68.7 | 11.3 |
70 | 99.5 | 92 | 68.7 | 11.3 |
75 | 107 | 97 | 68.7 | 11.3 |
80 | 112 | 105 | 78 | 12 |
85 | 120 | 110 | 76 | 14 |
90 | 127 | 115 | 76 | 14 |
95 | 132 | 120 | 76 | 14 |
100 | 137 | 125 | 76 | 14 |
We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.Advanced technology, excellence, replace original
1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers. |
2. Mechanical seals are available for different references Gorman-Rupp® pumps. Special models for the transfer of clean water, sewage, oil industry, agriculture and others.GRN-38'1 |
3. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT. |
4.Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation. |
5. Mechanical seals for EMU® pumps. They get two static faces and one rotating face. We can supply the complete seal or spare faces. |
6. Different designs of mechanical seals for Ebara® pumps, single and double seals in combinations carbide-silicon carbide and graphite-aluminium oxide. |
7. Mechanical seals for all types of Calpeda® pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials. |
8. Mechanical seals compatible for APV® pumps, among them: Puma, ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some designs with wave spring like the special seals for APV Howard® pumps and Crepaco Clean Line®. All of them have been manufactured in materials suitable for working with fluids such as juices, milk and drinks in general. |
9. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump. |
10. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM. |
Factory real shots Production site Exhibition exhibition Finished products inventory We have bulk stocks Fast delivery and good quality
Fixing and Applying Directions of Mechanical Seals
1. Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment.
2. The radial acting deviation for the shaft(shaft sleeve) of
the installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than
0.1mm.
3. The seal cover (or shaft cover) of the stationary ring of
the installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5. When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
filtrating.
6. Appropricate lubrication must be choosen when mechanical
seal is installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
7. Before the machine starts running,the hermetic compartment
shall be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict
forbidden.
