CR CRI CRN 12mm Grundfos Pump Mechanical Seal 96455086 96455087 HQQE HQQV

CR CRI CRN 12mm Grundfos Pump Mechanical Seal 96455086 96455087 HQQE HQQV

1. GLF-12/16/22/32/36mm is suitable for Grundfos CR CRN CRI 1 3 5 10 15 20 32 45 64 90 120 150 200 vertical multistage pump

2. Trisun's cartridge seals for Grundfos pumps, Pentair pumps, Stairs Pumps etc. brands have three structures: cartridge seals with Hexagon retainer, big round retainer and three-hole retainer.

3. It is equivalent to Grundfos Type H seal, HQQE and SQQE.

4. It is suitable for Grundfos CR1, 3, 5, 10, 15, 20, 32, 45, 64, 90 and CRN1, 3, 5, 10, 15, 20, 32, 45, 64, 90 pumps.

5. CR-GLF-12 for 96455082, 96455086, 96455083, 96455087 and 96455085, Pump models CR, CR8, CRI, CRN1, CRN3, CRN5, CRNE1, CRNE3-23HS;

6. CR-GLF-16 for 96511836, 96511840, 96511837, 96511844, 96511845 and 96511841, pump models CR, CRI, CRN10, CRN15 and CRN20;

7. CR-GLF-22 for 96416584, 96433365, 96525458, 96525459, 96525490, 96436728, pump models CR, CRN32, CRN45, CRN64 and CRN90.

 
Grundfos 96511844, Seal kit for the CR10, CR15 and CR20 new style pump.

GRUNDFOS SHAFT SEAL KIT HQQK (96533369), 96533326, 96511846, 96533367,96457057, 96457060

It is a cartridge type seal and has easy installation. We have them in stock and provide quick delivery.
 

1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers.

2. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT.

3. Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation.

4. Mechanical seals for EMU® pumps. They get two static faces and one rotating face. We can supply the complete seal or spare faces.

5. Different designs of mechanical seals for Ebara® pumps, single and double seals in combinations carbide-silicon carbide and graphite-aluminium oxide.

6. Mechanical seals for all types of Calpeda® pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials.

7. Mechanical seals compatible for APV® pumps, among them: Puma, ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some designs with wave spring like the special seals for APV Howard® pumps and Crepaco Clean Line®. All of them have been manufactured in materials suitable for working with fluids such as juices, milk and drinks in general.

8. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump.

9. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM.

10. Mechanical seals for ABS® submergible pumps specific wastewater treatment. Different models of mechanical seal available: oil chamber mechanical seal and water mechanical seal.

Factory real shot Production site Finished product inventory Exhibitors at the exhibition

Fixing and Applying Directions of Mechanical Seals

1. Select Appropriate mechanical seal to match the materials according to work conditions and host machine equipment.
2. The radial acting deviation for the shaft(shaft sleeve) of the installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than 0.1mm.
3. The seal cover (or shaft cover) of the stationary ring of the installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4. When installing the mechanical seals,the shaft(shaft sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5. When conveying medium of over high or low temperature,with medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take appropriate measures such as quench,rinsing,coolong and
filtrating.