|
[China]
Trade Verify
Address: Baiyun District, Guangzhou City, Guangdong Province, China
Contact name:Yang Aijun
Guangzhou Bogeman Mechanical Seal Co., Ltd. |
|
Verified Suppliers
|
|
|
John Crane Type T2 Pump Mechanical Seal SUS304 Elastomer Bellow Seals
Elastomer Bellow Seal , Replacement Of John Crane Type T2 Mechanical Pump Seals
Model NO. | T1 | Type | T2 |
Balance | Unbalanced | Rotary Ring | Ceramic/Sic |
Stationary Ring | Plastic Carbon/Carbon/Sic | Spring | SUS304/SUS316 |
Secondary Seal | NBR/EPDM/HNBR/ | Trademark | Bergman |
Transport Package | Carton | Specification | 1/2mm to 3-1/2mm |
Origin | China | HS Code | 84842000 |
STRUCTURE DESCRIPTION
Replacement of John Crane Type 2, rubber bellow design.
Operating range: | Material: |
Temperature: -25--200℃ | Seal ring: Car, Sic, Ssic, Ceramic, TC |
Speed: 15m/s. | Secondary seal: NBR, EPDM, etc. |
Pressure: 14bar | Spring and metal parts: 304, 316, HAST.C |
Standard size: 1/2-3-1/2mm or 0.5”-4.0” |
|
Fixing and Applying Directions of Mechanical Seals
1, Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment.
2,The radial acting deviation for the shaft(shaft sleeve) of the
installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than
0.1mm.
3,The seal cover (or shaft cover) of the stationary ring of the
installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4,When installing the mechanical seals,the shaft(shaft sleeve),seal
chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5,When conveying medium of over high or low temperature,with medium
which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
filtrating.
6,Appropricate lubrication must be choosen when mechanical seal is
installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
7,Before the machine starts running,the hermetic compartment shall
be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict
forbidden.
