Active Member
|
[China]
Address: China Zhejiang Wenzhou Economic Development Zone
Contact name:
Zhejiang THOR Electric Co., Ltd |
|
|
Gigabit network Simple installation guide Protect network cable equipment for surge protector
Model: TRSS-RJ11 / 45
Color: white
Authentication: CE ECM
Brief introduction
The TRSS-RJ45/8 type network lightning arrester is a
lightning protection measure taken by Zhejiang tohr Electric Co.,
Ltd. to independently develop and manufacture the network system.
It is used to protect sensitive high-speed communication network
from damage caused by lightning induced voltage, power
interference, electrostatic discharge and so on. The signal
lightning arrester adopts the multilevel protection circuit,
selects the world famous brand components and makes use of the
advanced production technology. It has the characteristics of large
flow capacity, low residual pressure level, sensitive reaction,
stable performance, reliable work and so on. It is suitable for
railway communication system, mobile base station, differential
station, hard disk recorder, video surveillance equipment, optical
terminal and other network transmission equipment to avoid
overvoltage damage such as inductive lightning stroke and
electrostatic discharge introduced by the system.
Product features
1. the product has many interfaces and is easy to use. It
doesn't need to worry about the number of interfaces.
2. upgrade transistor is equivalent to 2 diodes
3. self protection voltage is more than self
protection, automatic disconnection and recovery.
4. multi-functional overvoltage protection, lightning
and overpressure are no longer afraid of disasters.
Product specification
| Model and specofocation | TRSS-RJ45-8 | ||||||
| Rated Operating Voltage | Un | 5V/12V | |||||
| Max continuous operating voltage | Uc | 6V/15V | |||||
| Voltage protective level | Up(V)〈 | 40/60 | |||||
| Max discharge current | Imax(8/20μS) | 5kA | |||||
| Nominal discharge current | In(8/20μS) | 3kA | |||||
| Response time | ns | ≤1 | |||||
| Adaptive date transfer rate | 100Mbps | ||||||
| Insertion loss | ≤0.3dB | ||||||
| Configuration dimension | 104×25×25 | ||||||
| Protective circuit | 1.2.3.4.5.6.7.8 | ||||||
| Operating condition | Temp:-40℃~+70℃ | ||||||
| RH≤95%(25℃) | |||||||
| Sea level elevation≤3km | |||||||
| Remarks | Other max continuous operating voltage can be customized | ||||||
Working principle of product
The lightning arrester not only can protect the high voltage
of the atmosphere, but also can be used to protect the operation of
high voltage. If there is a thunderstorm, a high voltage will
appear and the electric equipment may be dangerous. At this point,
the arrester will play a role to protect the power equipment from
damage. The most important function of the arrester is to limit the
overvoltage to protect the electrical equipment. Lightning arrester
is a device to make the lightning current flow into the earth, so
that the electrical equipment does not generate high voltage.
Use of attention
1. connect the grounding wire of the lightning protector with
the ground wire of the lightning protection system.
2. the lightning arrester of the network switch is a series
connection mode.
3. please choose the network switch lightning protector
that is the same as the protected device's interface type.
4. lightning protection device IN as input and OUT as
output, the input end is connected with the outside, and the output
end of the input end of the connecting device is protected.
Product packaging:Carton packing
Transportation method
2. Trains, ships, aircraft transport
