|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
2S500-50 2'' Flow Control Stainless Steel Solenoid Valve 24V 220V
2S & SUW Series 2/2 Way Direct Lift Diaphragm Normally Closed
Solenoid Valve:
This valve is a two-way, normally closed, direct-lift valve and
does not require a minimum differential pressure to operate. As
shown in the diagrams below, when the coil is de-energized, the
plunger and flexible diaphragm sit on the main valve orifice. The
working medium flows through a tiny "bleed orifice" and pressurizes
the cavity above the diaphragm - this system pressure, along with
the spring force, seals the valve. When the valve is energized, the
diaphragm is pulled away from the main orifice, allowing fluid to
flow through the valve. Since the bleed orifice is dimensionally
smaller than the main orifice, the system pressure cannot rebuilt
on the top of the diaphragm as long as the main orifice remains
open.
Technical Data of 2W & 2S Solenoid Valve:
2W Series | 2W025-08 | 2W040-10 | 2W160-15 | 2W200-20 | 2W250-25 | 2W350-35 | 2W400-40 | 2W500-50 |
2S Series | 2S025-08 | 2S040-10 | 2S160-15 | 2S200-20 | 2S250-25 | 2S350-35 | 2S400-40 | 2S500-50 |
Orifice Size | 2.5 | 4 | 15 | 20 | 25 | 35 | 40 | 50 |
Port Size | 1/4'' | 3/8'' | 1/2'' | 3/4'' | 1'' | 1-1/4'' | 1-1/2'' | 2'' |
Medium | Water, Air, Gas, Oil | |||||||
Action | Direct Acting | Semi-Direct Diaphragm Operated | ||||||
Function | 2 Way, Normally Closed | |||||||
Fluid Viscosity | 20 CST below | |||||||
Pressure Range | 0 to 1.0 Mpa | |||||||
Temp. Range | -5 to +85℃ | |||||||
Main dimension of 2W & 2S Series Solenoid Valves:
2S Series | 2W Series | A | B | C | D | E |
2S025-06 | 2W025-06 | 64.5 | 30 | 75 | 43 | 1/8'' |
2S025-08 | 2W025-08 | 64.5 | 30 | 75 | 43 | 1/4'' |
2S040-10 | 2W040-10 | 70.6 | 32 | 82.4 | 53 | 3/8'' |
2S160-10 | 2W160-10 | 101.5 | 57 | 117 | 69 | 3/8'' |
2S160-15 | 2W160-15 | 101.5 | 57 | 117 | 69 | 1/2'' |
2S200-20 | 2W200-20 | 107 | 57 | 123.5 | 73 | 3/4'' |
2S250-25 | 2W250-25 | 111.5 | 73.5 | 134.5 | 99 | 1'' |
2S350-35 | 2W350-35 | 142 | 95 | 172 | 123 | 1-1/4'' |
2S400-40 | 2W400-40 | 142 | 95 | 172 | 123 | 1-1/2'' |
2S500-50 | 2W500-50 | 172 | 123 | 209 | 168 | 2'' |
Security
Generally, the solenoid valve is not waterproof. When the
conditions are not allowed, please choose waterproof type, the
factory can be customized.
The highest nominal pressure of the solenoid valve must exceed the
maximum pressure in the pipeline, otherwise the service life will
be shortened or other unexpected conditions will occur.
Corrosive liquids should be selected from all stainless steel type,
and strong corrosive fluids should be selected from plastic king
(SLF) solenoid valves.
Explosive environments must use the corresponding explosion-proof
products.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
