|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
2S250-25 1" Stainless Steel Diaphragm Solenoid Valve AC220V DC24V
The SUW-25/2S250-25 is a 1” Inch, 2 way, Stainless Steel solenoid valve with a solenoid coil. It is compatible with a variety of media such as liquids, gas, air, fuel, glycol and weak acids. It has a temperature range between 15°F and 250°F.
The SUW-25/2S250-25 is a solid Stainless Steel valve that features 1” inch female NPT inlet and outlet ports. Its compact size is great for fitting in tight places without compromising quality.
The coil is included with the valve. The connection can be made with the 5.5” lead wires using solder or terminal connectors. The coil has a voltage tolerance of +-10%. It is rated for 100% duty cycle but should not be powered indefinitely.
There are no minimum pressure requirements and the valve can handle pressure up to 115 PSI. The valve has a 25mm orifice and its flow rate can be calculated using the Cv value of 12.
YouTube video of 1'' 2 Way NC 2S250-25 SUW-25 UNi-D Type Solenoid Valve:
Overall dimension of SUW-25 2S250-25 G1'' Normally Closed Diaphragm Valve:
Technical parameters of 2S,SUS & SUW Series Stainless Steel Solenoid Valve:
| 2S Series | Uni-D Type | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (°C) | Operating Pressure kgf/ cm² (bar) | ||
| Water | Air | Light oil | ||||||
| 2S025-06 | SUS-6 | 1/8'' | 0.23 | 2.5mm | -5°C- +80°C | 0-7 | 0-7 | 0-7 |
| 2S025-08 | SUS-8 | 1/4'' | 0.23 | 2.5mm | -5°C- +80°C | 0-7 | 0-7 | 0-7 |
| 2S040-10 | SUS-10 | 3/8'' | 0.58 | 4mm | -5°C- +80°C | 0-7 | 0-7 | 0-7 |
| 2S160-10 | SUW-10 | 3/8" | 4.5 | 15mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S160-15 | SUW-15 | 1/2'' | 4.5 | 15mm | -5°C - +80°C | 0-5 | 0-7 | 0-5 |
| 2S200-20 | SUW-20 | 3/4" | 8.6 | 20mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S250-25 | SUW-25 | 1" | 12 | 25mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S350-35 | SUW-35 | 1-1/4" | 24 | 35mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S400-40 | SUW-40 | 1-1/2" | 28 | 40mm | -5°C - +80°C | 0-5 | 0-7 | 0-5 |
| 2S500-50 | SUW-50 | 2" | 48 | 50mm | -5°C - +80°C | 0-5 | 0-7 | 0-5 |
Details of 1 inch Diaphragm Operated Stainless Steel Electric Solenoid Valve:
Production process of NBR Diaphragm Semi-Direct Electromagnetic Valve:
Common Probelm: My solenoid valve is not working. What could be
wrong?
Point 1: The seal material is compatible with the medium that’s
being put through the valve
Solution 1: Make sure there is a proper electrical connection
(voltage, current, frequency) Use a multimeter to test all
components.
Point 2: The valve seal and orifice are free from debris.
Solution 2: The installed position of the valve is correct. Some
valves will only work in certain positions.
Point 3: The valve operates within the specific pressure range.
Some valves have minimum pressures requirements to function
properly.
Solution 3: The coil is disconnected or burned out. Check your
wiring to the coil and confirm the valve is receiving the correct
specifications. OHMs can be checked to determine if the coil has
burned out.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
