|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
MHL2-10D2 Double acting 0.1 to 0.6 Mpa Synthetic rubber Rack Staninless Steel Air cylinder
Advantage
1.One unit can handle workpieces withvarious diameters.
2.A large amount of gripping force isprovided through the use of
adouble piston mechanism, whilemaintaining a compact design.
3.Double-end type oil-impregnatedresin bearings with a metal
backingare used for all shafts.
4.Built-in dust-protection mechanismA high degree of freedom
formounting
5.Auto switch mountable
Gripping Point
The workpiece gripping point distance should be within the
grippingforce ranges given for each pressure in the effective
gripping forcegraphs below.
operated with the workpiece gripping point beyond the
indicatedranges, the load that will be applied to the fingers or
the guide willbecome excessively unbalanced.
As a result, the fingers couldbecome loosened and adversely affect
the service life of the unit.
Effective Gripping Force
Indication of effective gripping force.The gripping force shown in
the tablesrepresents the gripping force of onefinger when all
fingers and attachmentsare in contact with the work.F = one finger
thrust.
How to Mount the Attachment to the Finger
(1) Make sure that the piston rod is retracted so as not to apply
undue strain on the piston rod whilean attachment is being mounted
to the finger.
(2) Do not scratch or dent the sliding portion of the piston rod.
Damage to the bearings or sealsmay cause air leaks or faulty
operation.
(3) Refer to the table below for the proper tightening torque on
the bolt used for securing theattachment to the finger.
Auto Switch Mounting Brackets: Precautions
When auto switch is set on the mounting side as shown below, allow
atleast 2 mm run off space on mounting plate since the auto switch
isprotruded from the gripper edge.
Warning
If a workpiece is hooked onto the attachment, make sure that
excessive impact willnot be created at the start and the end of the
movement.
Failure to observe this precaution may result in shifting or
dropping the workpiece,which could be dangerous.
Model
| Model | Bore size (mm) | Max.operating frequency c.p.m | Opening/Closing stroke(mm) (L2-L1) | Width at closing(mm) (L1) | Width at closing(mm) (L2) | Mass (g) |
| MHL2-10D | 10 | 60 | 20 | 56 | 76 | 280 |
| MHL2-10D1 | 40 | 40 | 78 | 118 | 345 | |
| MHL2-10D2 | 60 | 96 | 156 | 425 | ||
| MHL2-16D | 16 | 60 | 30 | 68 | 98 | 585 |
| MHL2-16D1 | 40 | 60 | 110 | 170 | 795 | |
| MHL2-16D2 | 80 | 130 | 210 | 935 | ||
| MHL2-20D | 20 | 60 | 40 | 82 | 122 | 1025 |
| MHL2-20D1 | 40 | 80 | 142 | 222 | 1495 | |
| MHL2-20D2 | 100 | 162 | 262 | 1690 | ||
| MHL2-25D | 25 | 60 | 50 | 100 | 150 | 1690 |
| MHL2-25D1 | 40 | 100 | 182 | 282 | 2560 | |
| MHL2-25D2 | 120 | 200 | 320 | 2775 | ||
| MHL2-32D | 32 | 30 | 70 | 150 | 220 | 2905 |
| MHL2-32D1 | 20 | 120 | 198 | 318 | 3820 | |
| MHL2-32D2 | 160 | 242 | 402 | 4655 | ||
| MHL2-40D | 40 | 30 | 100 | 188 | 288 | 5270 |
| MHL2-40D1 | 20 | 160 | 246 | 406 | 6830 | |
| MHL2-40D2 | 200 | 286 | 486 | 7905 |
Specifications
| Bore size(mm) | 10 | 16 | 20 | 25 | 32 | 40 |
| Fluid | Air | |||||
| Action | Double acting | |||||
| Operating pressure(Mpa) | 0.15 to 0.6 | 0.1 to 0.6 | ||||
| Ambient and fluid temperature | -10 to 60 ℃ | |||||
| Repeatability | ±0.1 | |||||
| Lubrication | Not required | |||||
| Effective gripping force (N) at 0.5 Mpa | 14 | 45 | 74 | 131 | 228 | 396 |
Construction
Component Parts
Samples
You can send a sample to customize the products, we have many
engineers can help it; If you want a product of mine, but you are
not sure if it's what you want, so you can ask for a sample from
me, it will be free.
Products shopping guide
For example: you want to purchase a batch of cylinders but you
don't know which type you are really want, so you can tell me all
your requirement and I'll recommend to you.
