|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
Magnetically coupled
rodless CY1S Series Aluminum alloy CDY1S25H-150 CDY1S40H-200
cylinder
Warning
1. Be aware of the space between the plates and the slide
block.Take sufficient care to avoid getting your hands or
fingerscaught when the cylinder is operated.
2. Do not apply a load to a cylinder which is greater than the
allowable value stated in the ModelSelection pages.
Mounting And Caution
1. Avoid operation with the external slider fixed to the mounting
surface.The cylinder should be operated with the plates fixed to
themounting surface.
2. Perform mounting so that the external slider will operate
through the entire stroke at the minimum operating pressure.If the
mounting surface is not flat, the guides will be warped,increasing
the minimum operating pressure and causingpremature wear of the
bearings. Therefore, mounting shouldbe performed so that the
extemal slider will operate throughthe entire stroke at the minimum
operating pressure. Amounting surface with a high degree of
flatness is desirable,but in cases where this is not possible,
adjust with shims, etc.
Typical Applications
Printing (Tension Control)
Semiconductor (spot welding machine, chip grinding)
Automation Control
Robot
Model
| Type | Bearing type | Model | Bore size (mm) | Auto switch model | Adjustment type |
| Slider type | Slide bearing | CY1S | 6, 10, 15, 20, 25, 32, 40 | D-A7/A8 D-F7/J7 | With adjusting boltWith shock absorbe |
Specifications
| Fluid | Air | ||||
| Proof pressure | 1.05 MPa | ||||
| Max. operating pressure | 0.7 MPa | ||||
| Min. operating pressure | 0.18 MPa | ||||
| Ambient and fluid temperature | -10℃~60℃ | ||||
| Piston speed | 50 to 400 mm/s | ||||
| Cushion | Rubber bumper on both ends | ||||
| Lubrication | Non-lube | ||||
| Stroke length tolerance | 0 to 250st | ||||
| Mounting orientation | Free | ||||
Standard Stroke
| Bore Size (mm) | Standard strok(mm) | Maximum manufacyurable stroke(mm) |
| 6 | 50,100,150,200 | 300 |
| 10 | 50,100,150,200,250,300 | 500 |
| 15 | 50,100,150,200,250,300,350,400,450,500 | 750 |
| 20 | 50,100,150,200,250,300,350,400,450,500 600,700,800 | 1000 |
| 25 | 1500 | |
| 32 | ||
| 40 | 50,100,150,200,250,300,350,400,450,500 600,700,800,900,1000 | 1500 |
Quality Standards
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount, but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance, according to the original quality
standards, during warranty with product problems, need confirmation
testing by the manufacturer, the supplier to be solved, the demand
side due to storage, use, poor maintenance caused by lower-quality
product, and not raise objections.
