Home Companies Suzhou Delfino Environmental Technology Co., Ltd.

2 Channel 0/4~20mA RS485 IP66 pH ORP Meter Controller For Water

Suzhou Delfino Environmental Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Suzhou Xupai Road No.3

Contact name:Yuki Fu

Inquir Now

Suzhou Delfino Environmental Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

2 Channel 0/4~20mA RS485 IP66 pH ORP Meter Controller For Water

Country/Region china
City & Province suzhou
Categories Water Treatment
InquireNow

Product Details

 

2 channel 0/4~20mA RS485 IP66 pH ORP Meter Controller For Water

 

The APX1-G2 pH/ORP controller from Dreifenol connects to a variety of conventional pH/T or ORP combination sensors. A variety of models support differential signal input and support access to solution grounded pH sensors to solve operational problems in the presence of stray voltages and ground loops in the solution. APX is designed to meet the needs of many applications.

 

Advantages of pH/ORP controller:

  • Temperature unit: Automatic/manual temperature compensation for NTC10K or PT1000
  • Two relays high/low alarm control dosing
  • 2 channels of 0/4~20mA current
  • Temperature compensation: Temperature compensation or conversion at 25 °C
  • Differential signal, supporting solution grounding

 

pH ORP controller Parameters:

 

Product Name

PH ORP controller

Product ModelAPX1-G2
PH Range

0~14pH

ORP Range± 2000mV
Temperature Range

-10~150℃ /14~302℉

Resolution

0.01pH / 1mV/ 0.1℃

Accuracy

PH:±0.02 pH /ORP:±2 mV

Solution Grounding

It can eliminate the leakage interference of part of the solution

Stability

0.05% of the measurement range per 24 hours, no accumulation

Temp Compensation

NTC10K/PT1000 automatic selection or 25°C conversion manual selection

Sensor Diagnosis

Screen image display

Analog Current Output

2 channel 0/4~20mA,load 1000 ohms,and support long-term calibration

Relay Control

2 configurable SPST relays with a maximum load of 3A/250VAC

Digital communication

1 two-wire RS485 communication interface; MODBUS RTU

Screen Display

128*64 3.2-inch large graphic dot matrix LCD

Calibration method

pH: 3-point calibration/5-point calibration, ORP: 2-point calibration

quick calibration menu available

Operating Environment

0~60℃, RH< 95%

Storage Environment

-20~70℃, RH < 55%

Power Supply

AC: 100~240V 50/60Hz or DC:18~36V

Power Consumption3 W

Shell Material

Enhanced ABS

Size

100×100×120 mm(hole size 92*92mm)

Weight500g

Mounting Method

Panel installation

 

 

 

pH ORP controller Applications:

 

    Acid-base (pH) adjustment is to stabilize the pH value of the process medium within the required range to meet the needs of the process, in the electroplating process of electroplating solution pH control, metallurgical flotation process of pulp pH control, chemical process of process medium mother liquor pH control, etc.In water treatment process, the treated water pH value can greatly affect the use effect of potions, upon completion of a variety of different kinds of wastewater treatment may not allow emissions after the pH range.

 

 

If you are interested in the product pH ORP controller APX1-G2, please contact us.

 

 

 

 

Hot Products

IP66 ABS RS485 Output Online pH ORP controller for Water Treatment APX1 - C1Z is a measure of water ...
Support Ground pH Sensor Online PH ORP Controller for Power Plant The APX1-G2 pH/ORP controller from ...
100~240V 4-20mA RS485 Online pH controller with Automatic Dosing Control for water The APX1-G2 pH...
NTC10K/PT1000 RS485 4-20mA pH ORP Meter Controller For Water The APX1-G2 pH/ORP controller from ...
2 channel 0/4~20mA RS485 IP66 pH ORP Meter Controller For Water The APX1-G2 pH/ORP controller from ...
Supporting solution grounding 0~14pH RS485 IP66 pH ORP Meter Controller For sewage pH controller, ...