Round Arm Parking Barrier Gate / Security Boom Gate Rising Arm Barriers

 Round Arm Parking Barrier Gate Security Boom Gate Rising Arm Barriers

Features

1, power failure automatic gate, no clutch design,

Incoming call automatic reset, restore to close state. If you have special need that manual intervention, it can be set up easily, you can gently rotate poles to manual Open/ close boom without open the housing by using adjust the control board

2, a variety of input and output modes can be selected, often open and close can be selected.

3, Rod angle can be adjusted from 55~90 degrees, 10 degree resolution.

4, Closing speed can be adjusted, 0.9s, 1.3s, 1.8s.

5, all kinds of state signal output.

6, barrier gate running state OK signal output.

7, alarm signal output.

8, traffic lights signal relay output.

9, external Vehicle detection signal, infrared sensor signal.

10, AC90V~AC264V50/60Hz, the global universal voltage standard. Also available

24V battery power supply.(No mains place to pick up solar energy,wind energy to recharge battery)

11, the Opening time is less than 0.9s.

12, the running noise is less than 60dB.

13, standard file length 3m.

14, Power consumption: 50W, maximum power 100W.

15, It is also a simple matter to change the handing on-site from right-axial to left-axial.

16, automatically detect whether the balance spring fatigue or damage, if the spring

fatigue tips to adjust, if you can not adjust the spring, replace the spring is very easy,

no need to use tools, hand can be replaced.

17, remote control open / close and car park system control open / close, separate

input, respectively, the number of corresponding statistics.

18, the RS232 or RS485 connected to PC of the parking system.

Technical Data