|
[China]
Trade Verify
Address: 4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China
Contact name:Evelyn
Shenzhen iseelink Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Description
GPSP-1396-10D is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s.
It converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
The high performance 1310nm DFB transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 10km links
The SFP+ Module compliants with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.
Technical Information
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Supply Voltage | Vcc | 3.135 |
| 3.465 | V |
|
Supply Current | Icc |
|
| 430 | mA |
|
Power Consumption | P |
|
| 1.5 | W |
|
Transmitter Section: | ||||||
Input differential impedance | Rin |
| 100 |
| Ω | 1 |
Tx Input Single Ended DC Voltage Tolerance (Ref VeeT) | V | -0.3 |
| 4 | V |
|
Differential input voltage swing | Vin,pp | 180 |
| 700 | mV | 2 |
Transmit Disable Voltage | VD | 2 |
| Vcc | V | 3 |
Transmit Enable Voltage | VEN | Vee |
| Vee+0.8 | V |
|
Receiver Section: | ||||||
Single Ended Output Voltage Tolerance | V | -0.3 |
| 4 | V |
|
Rx Output Diff Voltage | Vo | 300 |
| 850 | mV |
|
Rx Output Rise and Fall Time | Tr/Tf | 30 |
|
| ps | 4 |
LOS Fault | VLOS fault | 2 |
| VccHOST | V | 5 |
LOS Normal | VLOS norm | Vee |
| Vee+0.8 | V | 5 |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Per SFF-8431 Rev 3.0
3. Into 100 ohms differential termination.
4. 20%～80%
5. LOS is an open collector output. Should be pulled up with 4.7k – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.
6. SONET OC-192 / SDH
7. 10GBASE-LR/LW Ethernet
Application
Dimension
