Home Companies Shenzhen iseelink Communication Technology Co., Ltd.

Full Duplex Industrial Ethernet Switch IEEE 802.3u 10Base-T Oem

Contact Us

[China]

Trade Verify

Address: 4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China

Contact name:Evelyn

Shenzhen iseelink Communication Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Full Duplex Industrial Ethernet Switch IEEE 802.3u 10Base-T Oem

Country/Region	china
City & Province	shenzhen

Product Details

5 port gigabit unmanaged Industrial ethernet Switch

Introduction of 5 port gigabit industrial ethernet switch

IM-FS050GE series is the 10/100/1000 Mbps industrial network switch, simple construction, power range up to 100 meters, operating temperature-40 ℃ to + 75 ℃, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.

Product Features of unmanaged network switch

·4 x 10/100/1000Mbps Auto-sensing RJ45 ports

·1 x 10/100/1000Mbps uplink network port

·4 KV Ethernet surge protection, adapt to

·a harsh outdoor environment

·Support Auto MDI/MDIX

·Flow control mode: full duplex with IEEE 802.3x standard, half-duplex

·with Back pressure standard

·IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant

·A store-and-forward switching mechanism

·Operating environment temperature:-40 ° ~75 ° c

Specifications

Product Name	10/100/1000Mbps Industrial Network Switch (5TP)
Model No.	IM-FS050GE
Port	1 x 10/100/1000Mpbs uplink network port 4 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
Switching features	Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam)
Network media	10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)
LEDs	Power, network
Power supply	Input voltage:DC 9-36V No-load power:5W Reverse connection:support
Environment	Working temperature:-40°～ 85°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing
Industry Standards	EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4

Dimension of unmanaged gigabit switch

Production Steps

Welding: Weld the necessary components
Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
Assembling: Builds up components of a product, like panels, screws, PCB boards.
Testing: To make sure the product is basically working fine after assembling
Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
When all above is done, the product will go to market.

Why choose us?

1. All products are under strict quality control and well tested for 3 times

before shipment;

2. According to the survey, the repair rate of our products is 3% ~ 5%,

which is the lowest in the peer.

3. Any problem, pls feel free to contact us.

4. The warrany of the commercial products is 1 years while the industrial products is 3 years.