Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYK-M861Y-000 / 6301457413 SENSOR,PELEC Hitachi Smt Parts for GXH-1S
| Part No | KYK-M861Y-000 / 6301457413 |
| Part Name | SENSOR,PELEC |
| Condition | Original new or Compatible new |
| Usage | Hitachi GXH-1S machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| COVER | KYK-M86RD-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NPM 185 NOZZLE | N610070338AB |
| PIN,HINGE | KYL-M860R-000 |
| LEVER | KYB-M3T33-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| VALVE | 4-187-212-01 |
| DEK SQUEEGE | DEK-03T 长25CM |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| PIN_LOCATE | KYD-MC137-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| Fuji Packing | PH00991 |
| WASHER | 92902-03200 |
| ASSY,LEVER | KYM-M8648-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY_LEVER | KYD-MC212-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| CYLINDER | KYL-M869A-000 |
| GXH SPECIAL NOZZLE | 13053 |
| NPM 235CS NOZZLE | N610043815AA |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| GUIDE,LINEAR | LWHD12X3 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| FEEDER | GD38080 |
| 938 NOZZLE | 00322592-05 |
| HELICAL SPRING | N210068065AA |
| BLOCK | KYF-M867D-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| NOZZLE_HV19C | KYA-M7719-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| BOTTON | ZB6-EB3B |
| SEAL | KYT-M862W-000 |
| FEEDER CABLE | KYL-M869D-000 |
| 1220 NOZZLE | 51305323 |
| NPM H16 SENSON | N510054833AA |
| FUSE | KYL-M86KH-000 |
| TIMING BELT | KYB-M919E-000 |
| 234F NOZZLE | 45466931 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| BUCK_UP_PIN | KYA-M3802-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| LEVER | KYB-M3T22-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| SENSOR,PELEC | KYL-M86HL-000 |
| POGO BLOCK | 0738A-0029 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| MICRO METER | 350-251-30 |
| ASSY_GEAR | KYD-MC412-000 |
| ASSY,GEAR | KYM-M862C-000 |
| MOTOR | KYA-M700R-000 |
| TOOL | N510031628AA |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| BM02 NOZZLE | BM02 |
| GEAR | KYD-MC153-00 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| BELT | N510065133AA |
| NOZZLE | HG53G |
| NOZZLE(HB03C) | KYB-M7720-100 |
| DRIVER | N510002593AA |
| SONY NOZZEL AF12082 | AF12082 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| ARM STEEL | N210007284AB |
| NOZZLE_HV13C | KYA-M7713-000 |
| 937 NOZZLE | 00322591-06 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| GEAR | KYK-M864C-000 |
| SEAL | KYB-M704E-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| BELT | N510021326AA |
| KIC ON BOARD | 6-10 CHANEL |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| ASSY GRIP | KYD-MC21H-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| NPM 226CS NOZZLE | N610040783AB |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GEAR | KYD-MC424-000/223E0481 |
| SPRING_COMP | KYD-MCN41-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| POWER SUPPLY | 1-474-020-11 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| I/O CABLE,WIDE | 0938A-1007 |
| Fuji Filter | AA1FZ04 |
| SLIP RING | KYB-M7027-000 |
| POWER SUPPLY | 11632XA |
| COVER(MAK1-2) | KYD-MC11X-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| NOZZLE(BA06) | KYB-M77A6-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| VALVE | SY3240-5LZD |
| GT38080 FEEDER | GT38080 FEEDER |
| NOZZLE(FA06) | KYB-M77F6-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| HNS,CORD | KYL-M8621-000 |
| COVER(RB) | KYD-MC10L-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| PIN_LOCATE | KYD-MC132-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PIN_HINGE | KYD-MC41U-000 |
| CPK JG0250 | CPK JG0250 |
| GUIDE | KYD-MC11T-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| GEAR | KYD-MC23C-00 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| NPM 240C NOZZLE | N610062681AD |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| LEVER | KYK-M86LV-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| 933 NOZZLE | 00346523-03 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BELT | 6*3080*0.9 mm |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GEAR | KYD-MC20K-00 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| DISK | KYB-M3T1A-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| VALVE | SY3120-MZD-C6-F2 |
| COUPLING | KYK-M86AW-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| ASSY,SPROCKET | KYM-M862A-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| GEAR | 4-719-921-02 |
| GREASE | N990PANA-023 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| PIN,HINGE | KYB-M3T31-000 |
| BELT_TIMING | KYA-M914W-000 |
| YG12F BELT | KHY-M9129-00 |
| BOLT-HEX-SCT | 90990-01J115 |
| LEVER | KYB-M3T01-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| ROLLER(B) | KYK-M86EM-000 |
| WASHER | 92902-03100 |
| ROCK | 2-149-675-01 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| WASHER | 90990-37J010 |
| COVER ASSY | X-4700-067-4 |
| DD MOTOR | KYF-M860E-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| FFU | MX--575-A |
| GRIP | KYD-MC109-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| VALVE | 2-673-684-01 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BELT | 00334936S01 |
| MOTOR_DC | KYD-MC410-000 |
| 935 NOZZLE | 00346524-03 |
| SEAL | KYB-M702B-000 |
| RT BELT | 3-212-264-01 |
| SENSOR-PELEC | KYK-M861Y-000 |
| UNIT,I/O | KYL-M86LV-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| COVER(RB) | KYM-M8612-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| SONY NOZZEL | AF10071 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| COVER(LB) | KYM-M8657-000 |
| SDD Hard Disk | N610059692AA |
| NPM 230C NOZZLE | N610040784AD |
| GREASE FOR PANASONIC | N510048188AA |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| 340F NOZZLE | 45466934 |
| YG12 BELT | KHY-M9129-10 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| FAN | 1204KL-04W-B59 |
| BALL | 4-719-920-01 |
| NPM 235C NOZZLE | N610043814AD |
| SPRING_COMP | KYD-MC129-000 |
| NPM 230CS NOZZLE | N610040788AD |
| ASSY_GEAR | KYD-MC40F-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| SPRING_COMP | KYD-MC3T-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| MACHINE SCREW | KYD-MC14G-000 |
| SPRING COMP | KYD-MC13T-000 |
| DSP-2008K SQUEEGE | L:20CM |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| BRACKET | KYL-M86KD-000/211FC709 |
| NOZZLE_HG33C | KYA-M7703-000 |
| 904 NOZZLE | Y074-V904-0015 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| GEAR | KYU-M868B-000 |
| CASE-CONN | KYK-M860Y-000 |
| BELT | N510060977AA |
| NOZZLE_HG52C | KYA-M7705-000 |
| SENSOR | KYF-M8681-000 |
| LEVER | KYB-M3T21-000 |
| PIN_HINGE | KYD-MC42S-000 |
| NPM X479 VALVE | N510054843AA |
| MOTOR_DC | KYD-MCN2G-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| ASSY GEAR | KYD-MC211-000 |
| SONY NOZZLE | CF25200 |
| COUPLING | KYB-M7116-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| SLIP RING | KYB-M7027-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| B-234 NOZZLE | 47561103-B-234 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| GERA(HASUBA) | KYD-MC131-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| 360F NOZZLE | 45466917 |
| ASSY_SHAFT | KYF-M8651-000 |
| NPM FILTER | N610097899AA |
| ETC MOTOR | PK2K93S-2D |
| PIPE FITTING | 630 048 4656 |
| BELT | 44548605 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| PIN,HINGE | KYD-MC41S-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| UNIT,DRIVER | KYK-M860K-000 |
| PIN-GAUGE | KXF00YHTA00 |
| GEAR | KYD-MC23C-000/6301352305 |
| GEAR | KYD-MC21U-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| CASE-CONN | KYF-M860Y-000 |
| SPRING_COMP | KYB-M91CS-000 |
| PIN-GAUGE | KXF00YHUA00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| LEVER | KYK-M861V-000 |
| LEVER | KYB-M3T0M-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| WASHER | KYD-MC22H-00 |
| BLOCK | KYL-M86KC-000/211G5472 |
| BELT TIMING | KYA-M9152-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| HOLDER | KYB-M702F-000/0916DK2D |
| GUIDE,LINEAR | KYF-M867P-000 |
| CORD,BCR | KYF-M86NC-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE(FA05) | KYB-M77F5-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| ASSY,LEVER | KYM-M864H-000 |
| SONY1000 FILTER | 4-761-920-01 |
| FILTER | K46-M8527-COX |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PLATE | N610014970AE |
| NPM H8 SENSON | N510048691AA |
| COUPLING | KYB-M702C-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| BLOCK | KYA-M7027-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| COVER | KYM-M860X-000 |
| HOLDER | KYB-M701R-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| PCBA FIXTURE | FC150-130-60 |
| Encoder Read Head For Universal | 49566101 |
| PLATE | KYA-M3804-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| GUIDE,LINEAR | KYK-M860S-000 |
| PCB-MOUNT | KYK-M861W-000 |
| BLOCK L3 | KYB-M960C-000 |
| SPRING COMP | KYD-MC422-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NPM H16 SHAFT | N510064335AA |
| SPRING | P/N:0730C-0252 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
