Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYB-M919E-000 / 223L0383 BELT-TIMING Hitachi Smt Spare Parts
| Part No | KYB-M919E-000/223L0383/6301661285 |
| Part Name | BELT_TIMING |
| Condition | Compatible new / Original new |
| Material | Rubber |
| Usage | Hitachi G5S machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY,SPROCKET | KYM-M862A-000 |
| Fuji Packing | PH00991 |
| COVER(LB) | KYM-M8657-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SLIP RING | KYB-M7027-000 |
| WASHER | KYD-MC22H-00 |
| PIN_LOCATE | KYD-MC132-000 |
| NPM 230C NOZZLE | N610040784AD |
| GUIDE,LINEAR | KYK-M86KY-000 |
| ASSY,LEVER | KYM-M8648-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ASSY,LEVER | KYM-M864H-000 |
| SONY NOZZEL AF12082 | AF12082 |
| COVER | KYM-M860X-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| GUIDE,LINEAR | LWHD12X3 |
| FEEDER CABLE | KYL-M869D-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BUSH,BEARING | KYB-M3T3S-000 |
| SPRING COMP | KYD-MC13T-000 |
| NPM 230CS NOZZLE | N610040788AD |
| HV31 NOZZLE | KYL-M7718-000 |
| DRIVER | N510002593AA |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| VALVE | SY3120-MZD-C6-F2 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| BLOCK | KYF-M867D-000 |
| NPM 235CS NOZZLE | N610043815AA |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| BELT_TIMING | KYA-M914W-000 |
| ROLLER(B) | KYK-M86EM-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| PIN,HINGE | KYL-M860R-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| SPRING | P/N:0730C-0252 |
| GXH-1 FILTER | KYL-M860S-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| NPM 226CS NOZZLE | N610040783AB |
| FILTER | K46-M8527-COX |
| SPRING_COMP | KYB-M91CS-000 |
| TIMING BELT | KYB-M919E-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| LEVER | KYB-M3T22-000 |
| LEVER | KYB-M3T0M-000 |
| HNS,CORD | KYL-M8621-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| MICRO METER | 350-251-30 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| Encoder Read Head For Universal | 49566101 |
| GREASE FOR PANASONIC | N510048188AA |
| CORD,BCR | KYF-M86NC-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| BELT TIMING | KYA-M9152-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| BELT | 6*3080*0.9 mm |
| CASE-CONN | KYK-M860Y-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| BOTTON | ZB6-EB3B |
| PCB-MOUNT | KYK-M861W-000 |
| ARM STEEL | N210007284AB |
| Fuji Filter | AA1FZ04 |
| BALL | 4-719-920-01 |
| COGNEX BOARD | KYK-M86PW-000 |
| CASE-CONN | KYF-M860Y-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| COVER(MAK1-2) | KYD-MC11X-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| SONY NOZZEL | AF10071 |
| PIN_HINGE | KYD-MC42S-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| VALVE | 4-187-212-01 |
| SENSOR,PELEC | KYL-M8609-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| SPRING COMP | KYD-MC422-000 |
| NPM H8 SENSON | N510048691AA |
| COVER(HIRA-1) | KYD-MC20X-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| NOZZLE | HG53G |
| 938 NOZZLE | 00322592-05 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| POWER SUPPLY | 11632XA |
| WASHER | 92902-03200 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| COUPLING | KYB-M702C-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| COUPLING | KYB-M7116-000 |
| UNIT,I/O | KYL-M86LV-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| PIN-GAUGE | KXF00YHTA00 |
| SLIP RING | KYB-M7027-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| FEEDER | GD38080 |
| ASSY,HOOK | KYD-MC40A-000 |
| NPM 240C NOZZLE | N610062681AD |
| PIN_LOCATE | KYD-MC137-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| CPK JG0250 | CPK JG0250 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| VALVE | 2-673-684-01 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| POGO BLOCK | 0738A-0029 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| HELICAL SPRING | N210068065AA |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| 234F NOZZLE | 45466931 |
| NPM H16 SHAFT | N510064335AA |
| NOZZLE_HV19C | KYA-M7719-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| PIN_HINGE | KYD-MC41U-000 |
| LEVER | KYK-M86LV-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| UNIT,DRIVER | KYK-M860K-000 |
| PLATE | KYA-M3804-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| PIPE FITTING | 630 048 4656 |
| SPRING_COMP | KYD-MC3T-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| DISK | KYB-M3T1A-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| SENSOR | KYF-M8681-000 |
| BELT | 00334936S01 |
| LEVER | KYB-M3T33-000 |
| SEAL | KYB-M704E-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| NOZZLE(HB04C) | KYB-M7721-100 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| TOOL | N510031628AA |
| NPM FILTER | N610097899AA |
| CAM FOLLOWER | KYB-M704A-000 |
| SEAL | KYT-M862W-000 |
| COUPLING | KYK-M86AW-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| BELT | N510021326AA |
| NOZZLE_HG82C | KYA-M7708-000 |
| ROCK | 2-149-675-01 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| ASSY_GEAR | KYD-MC40F-000 |
| HOLDER | KYB-M701R-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| PIN_LOCATE | KYD-MC21Y-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| 935 NOZZLE | 00346524-03 |
| FUSE | KYL-M86KH-000 |
| BELT | 6*3080*0.9 mm |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| WASHER | 92902-03100 |
| GUIDE,LINEAR | KYK-M860S-000 |
| BELT | N510065133AA |
| BELT | N510060977AA |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| YG12F BELT | KHY-M9129-00 |
| SONY NOZZLE | CF25200 |
| BUCK_UP_PIN | KYA-M3802-000 |
| GREASE | N990PANA-023 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| SPRING_COMP | KYD-MCN41-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| GEAR | KYD-MC21U-000 |
| LEVER | KYB-M3T01-000 |
| GRIP | KYD-MC109-000 |
| ASSY,GEAR | KYM-M862C-000 |
| COVER ASSY | X-4700-067-4 |
| B-234 NOZZLE | 47561103-B-234 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| FFU | MX--575-A |
| TAIL PIVOT | P/N:0740C-0109 |
| NPM X479 VALVE | N510054843AA |
| NPM H16 SENSON | N510054833AA |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| WASHER | 90990-37J010 |
| NPM 235C NOZZLE | N610043814AD |
| GERA(HASUBA) | KYD-MC131-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GEAR | KYD-MC23C-00 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| GEAR | 4-719-921-02 |
| CAM_FOLLOWER | KYA-M912N-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| I/O CABLE,WIDE | 0938A-1007 |
| YG12 BELT | KHY-M9129-10 |
| BELT | 44548605 |
| PIN-GAUGE | KXF00YHUA00 |
| HOLDER | KYB-M702F-000/0916DK2D |
| NOZZLE(FA04) | KYB-M77F4-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| CYLINDER | KYL-M869A-000 |
| 933 NOZZLE | 00346523-03 |
| 340F NOZZLE | 45466934 |
| BUSH,BEARING | KYB-M3T3R-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| 360F NOZZLE | 45466917 |
| DEK SQUEEGE | DEK-03T 长25CM |
| ASSY_SHAFT | KYF-M8651-000 |
| LEVER | KYK-M861V-000 |
| BLOCK L3 | KYB-M960C-000 |
| 937 NOZZLE | 00322591-06 |
| BOLT-HEX-SCT | 90990-01J115 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE(VC74) | KYK-M7725-000 |
| RT BELT | 3-212-264-01 |
| NPM 185 NOZZLE | N610070338AB |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| GUIDE | KYD-MC11T-000 |
| MOTOR_DC | KYD-MC410-000 |
| SONY1000 FILTER | 4-761-920-01 |
| GEAR | KYD-MC20K-00 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| ASSY_LEVER | KYD-MC212-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ASSY GEAR | KYD-MC211-000 |
| ASSY_GEAR | KYD-MC412-000 |
| SPRING_COMP | KYD-MC129-000 |
| KIC ON BOARD | 6-10 CHANEL |
| NOZZLE_HV14C | KYA-M7714-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| BLOCK | KYL-M86KC-000/211G5472 |
| VALVE | SY3240-5LZD |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| FAN | 1204KL-04W-B59 |
| GEAR | KYD-MC153-00 |
| LEVER | KYB-M3T21-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| GEAR | KYU-M868B-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| 904 NOZZLE | Y074-V904-0015 |
| ASSY_GEAR | KYD-MC11A-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| COVER(RB) | KYD-MC10L-000 |
| DD MOTOR | KYF-M860E-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| 1220 NOZZLE | 51305323 |
| PIN,HINGE | KYB-M3T31-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ETC MOTOR | PK2K93S-2D |
| PLATE | N610014970AE |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| MOTOR | KYA-M700R-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| COVER(RB) | KYM-M8612-000 |
| GXH SPECIAL NOZZLE | 13053 |
| GEAR | KYD-MC424-000/223E0481 |
| POWER SUPPLY | 1-474-020-11 |
| LINE-SENSOR | KYF-M8607-000 |
| DSP-2008K SQUEEGE | L:20CM |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| LEVER(SUP) | KYD-MC20D-000 |
| PIN,HINGE | KYD-MC41S-000 |
| ASSY GRIP | KYD-MC21H-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| BLOCK | KYA-M7027-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| SDD Hard Disk | N610059692AA |
| COVER | KYK-M86RD-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| BELT | 00200341-01 |
| SEAL | KYB-M702B-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| GEAR | KYK-M864C-000 |
| BM02 NOZZLE | BM02 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
