Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYB-M91DE-000 / 4U240489 UNIT-DRIVER Hitachi Smt Spare Parts for G5
| Part No | KYB-M91DE-000 / 4U240489 |
| Part Name | UNIT-DRIVER |
| Condition | Original New or Original Used |
| Usage | Hitachi G5 machine |
| Type | Smt part |
Hot sale stock list:
| SONY NOZZEL AF12082 | AF12082 |
| DRIVER | N510002593AA |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| LINE-SENSOR | KYF-M8607-000 |
| ETC MOTOR | PK2K93S-2D |
| NPM 230CS NOZZLE | N610040788AD |
| SENSOR,PELEC | KYL-M8609-000 |
| Fuji Filter | AA1FZ04 |
| SENSOR,PELEC | KYL-M86HL-000 |
| CYLINDER | KYL-M869A-000 |
| COVER(RB) | KYD-MC10L-000 |
| WASHER | KYD-MC22H-00 |
| TAIL PIVOT | P/N:0740C-0109 |
| ASSY_CABLE | KYL-M86NC-000 |
| NPM H16 SHAFT | N510064335AA |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| BELT | 00334936S01 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| SPRING_COMP | KYB-M91CS-000 |
| VALVE | 4-187-212-01 |
| LEVER | KYB-M3T21-000 |
| SPRING_COMP | KYD-MCN41-000 |
| WASHER | 92902-03200 |
| DISK | KYB-M3T1A-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| SPRING COMP | KYD-MC13T-000 |
| NOZZLE | HG53G |
| 933 NOZZLE | 00346523-03 |
| NPM 230C NOZZLE | N610040784AD |
| ASSY,LEVER | KYM-M864H-000 |
| SPRING COMP | KYD-MC422-000 |
| POWER SUPPLY | 11632XA |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| ASSY_LEVER | KYD-MC212-000 |
| SONY NOZZLE | CF25200 |
| ASSY,LEVER | KYM-M8648-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| GUIDE,LINEAR | KYK-M860S-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| NOZZLE_HV13C | KYA-M7713-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| BELT | N510060977AA |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| CPK JG0250 | CPK JG0250 |
| BELT_TIMING | KYA-M914W-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| CASE-CONN | KYF-M860Y-000 |
| BELT | 44548605 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| SPRING | P/N:0730C-0252 |
| GUIDE | KYD-MC11T-000 |
| B-234 NOZZLE | 47561103-B-234 |
| GERA(HASUBA) | KYD-MC131-000 |
| GEAR | KYD-MC153-00 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| 935 NOZZLE | 00346524-03 |
| SLIP RING | KYB-M7027-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| PIN_LOCATE | KYD-MC132-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| POWER SUPPLY | 1-474-020-11 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| 904 NOZZLE | Y074-V904-0015 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| GRIP | KYD-MC109-000 |
| SLIP RING | KYB-M7027-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| PIN_HINGE | KYD-MC41U-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| LEVER | KYB-M3T0M-000 |
| Fuji Packing | PH00991 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| NPM FILTER | N610097899AA |
| KIC ON BOARD | 6-10 CHANEL |
| 938 NOZZLE | 00322592-05 |
| FEEDER CABLE | KYL-M869D-000 |
| BELT | 6*3080*0.9 mm |
| AIR_LINE_EQPT | KYB-M704D-000 |
| WASHER | 90990-37J010 |
| 340F NOZZLE | 45466934 |
| PIPE FITTING | 630 048 4656 |
| GEAR | KYD-MC424-000/223E0481 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| BLOCK L3 | KYB-M960C-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| TIMING BELT | KYB-M919E-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| PIN-GAUGE | KXF00YHUA00 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| SONY1000 FILTER | 4-761-920-01 |
| PIN-GAUGE | KXF00YHTA00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SEAL | KYB-M704E-000 |
| GEAR | KYD-MC21U-000 |
| ARM STEEL | N210007284AB |
| PLATE | N610014970AE |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| GEAR | KYD-MC20K-00 |
| SPRING_COMP | KYD-MC129-000 |
| 360F NOZZLE | 45466917 |
| MOTOR_DC | KYD-MCN2G-000 |
| LEVER | KYB-M3T01-000 |
| LEVER | KYK-M861V-000 |
| BELT | N510065133AA |
| NPM 235C NOZZLE | N610043814AD |
| DD MOTOR | KYF-M860E-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| MOTOR | KYA-M700R-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| COVER | KYM-M860X-000 |
| GEAR | KYD-MC23C-00 |
| GEAR | KYU-M868B-000 |
| SENSOR | KYF-M8681-000 |
| NPM 185 NOZZLE | N610070338AB |
| LEVER | KYB-M3T22-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| NOZZLE(FA06) | KYB-M77F6-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| LEVER | KYB-M3T33-000 |
| MICRO METER | 350-251-30 |
| FUSE | KYL-M86KH-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| LIGHTING_UNIT | KYB-M700T-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| GUIDE,LINEAR | KYF-M867P-000 |
| FFU | MX--575-A |
| SONY E1000 FILTER | 4-761-920-01 |
| GEAR | KYK-M864C-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| COVER | KYK-M86RD-000 |
| YG12F BELT | KHY-M9129-00 |
| ROCK | 2-149-675-01 |
| SONY MOTHER BOARD | 1-797-651-12 |
| BALL | 4-719-920-01 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| COVER ASSY | X-4700-067-4 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| SHAFT ASSY. | KYF-M864U-000 |
| GEAR | 4-719-921-02 |
| PIN,LOCATE | KYD-MCN3N-000 |
| PIN_LOCATE | KYD-MC137-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| BOTTON | ZB6-EB3B |
| GT38080 FEEDER | GT38080 FEEDER |
| SPRING_COMP | KYD-MC3T-000 |
| GREASE | N990PANA-023 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| MOTOR_DC | KYD-MC410-000 |
| ASSY_GEAR | KYD-MC412-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| NPM 226CS NOZZLE | N610040783AB |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| CASE-CONN | KYK-M860Y-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| COGNEX BOARD | KYK-M86PW-000 |
| BELT TIMING | KYA-M9152-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| UNIT,I/O | KYL-M86LV-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| PIN,HINGE | KYD-MC41S-000 |
| PIN,HINGE | KYB-M3T31-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| NPM 235CS NOZZLE | N610043815AA |
| GXH-1 FILTER | KYL-M860S-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ASSY,GEAR | KYM-M862C-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| PIN_HINGE | KYD-MC42S-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| NPM H16 SENSON | N510054833AA |
| GUIDE,LINEAR | KYK-M86KY-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| UNIT-DRIVER | KYK-M861A-000 |
| RT BELT | 3-212-264-01 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| 937 NOZZLE | 00322591-06 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| BOLT-HEX-SCT | 90990-01J115 |
| GREASE FOR PANASONIC | N510048188AA |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| FAN | 1204KL-04W-B59 |
| ASSY GEAR | KYD-MC211-000 |
| HNS,CORD | KYL-M8621-000 |
| ROLLER(B) | KYK-M86EM-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| SEAL | KYT-M862W-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| VALVE | SY3120-MZD-C6-F2 |
| COUPLING | KYB-M7116-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SONY NOZZEL | AF10071 |
| ASSY,SPROCKET | KYM-M862A-000 |
| PCB-MOUNT | KYK-M861W-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| HOLDER | KYB-M701R-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| SDD Hard Disk | N610059692AA |
| COVER (12/16mm) | KYD-MC20Y-000 |
| TOOL | N510031628AA |
| YG12 BELT | KHY-M9129-10 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| COVER(LB) | KYM-M8657-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| NPM H8 SENSON | N510048691AA |
| Encoder Read Head For Universal | 49566101 |
| LEVER(SUP) | KYD-MC20D-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SEAL | KYB-M702B-000 |
| FEEDER | GD38080 |
| NPM 240C NOZZLE | N610062681AD |
| LEVER | KYK-M86LV-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE_HG82C | KYA-M7708-000 |
| NPM X479 VALVE | N510054843AA |
| POGO BLOCK | 0738A-0029 |
| COUPLING | KYB-M702C-000 |
| COVER(RB) | KYM-M8612-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| VALVE | SY3240-5LZD |
| ASSY,HOOK | KYD-MC40A-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| SENSOR,PELEC | KYK-M86DE-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| BLOCK | KYA-M7027-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BM02 NOZZLE | BM02 |
| WASHER | 92902-03100 |
| SENSOR-PELEC | KYK-M861Y-000 |
| PCBA FIXTURE | FC150-130-60 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| ASSY GRIP | KYD-MC21H-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| PLATE | KYA-M3804-000 |
| BLOCK | KYF-M867D-000 |
| COUPLING | KYK-M86AW-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| HELICAL SPRING | N210068065AA |
| PULLEY_TIMING | KYB-M91AL-000 |
| 1220 NOZZLE | 51305323 |
| GUIDE,LINEAR | LWHD12X3 |
| HV31 NOZZLE | KYL-M7718-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| PIN,HINGE | KYL-M860R-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| DSP-2008K SQUEEGE | L:20CM |
| UNIT_DRIVER | KYK-M860F-000 |
| CORD,BCR | KYF-M86NC-000 |
| FILTER | K46-M8527-COX |
| NOZZLE_HG52C | KYA-M7705-000 |
| BELT | 6*3080*0.9 mm |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| BELT | N510021326AA |
| ACCESSORY,SV | KYL-M861C-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| GXH SPECIAL NOZZLE | 13053 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| 234F NOZZLE | 45466931 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| VALVE | 2-673-684-01 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
