Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYK-M860P-000 / 6301236964 TABLE BACK UP MOTOR Hitachi Smt Spare Parts
| Part No | KYK-M860P-000 / 6301236964 |
| Part Name | TABLE BACK UP MOTOR |
| Condition | Original new or Compatible new |
| Usage | Hitachi machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| VALVE | 4-187-212-01 |
| ASSY_CABLE | KYL-M86NC-000 |
| BELT | N510060977AA |
| 935 NOZZLE | 00346524-03 |
| POWER SUPPLY | 1-474-020-11 |
| GEAR | KYD-MC153-00 |
| NPM FILTER | N610097899AA |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| TIMING BELT | KYB-M919E-000 |
| PLATE | N610014970AE |
| BELT | 44548605 |
| VALVE | SY3120-MZD-C6-F2 |
| COUPLING | KYK-M86AW-000 |
| ASSY GEAR | KYD-MC211-000 |
| NPM 235CS NOZZLE | N610043815AA |
| COGNEX BOARD | KYK-M86PW-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| PULLEY_TIMING | KYB-M91AL-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| FUSE | KYL-M86KH-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| PIPE FITTING | 630 048 4656 |
| YG12 BELT | KHY-M9129-10 |
| ACCESSORY,SV | KYL-M861C-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| COVER | KYK-M86RD-000 |
| BELT | N510065133AA |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| B-234 NOZZLE | 47561103-B-234 |
| POWER SUPPLY | 11632XA |
| GERA(HASUBA) | KYD-MC131-000 |
| FEEDER CABLE | KYL-M869D-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| SPRING_COMP | KYD-MCN41-000 |
| BELT_TIMING | KYA-M914W-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| CASE-CONN | KYF-M860Y-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| 360F NOZZLE | 45466917 |
| SONY NOZZLE | CF25200 |
| SENSOR,PELEC | KYK-M86DE-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| WASHER | 90990-37J010 |
| NPM H8 SENSON | N510048691AA |
| FFU | MX--575-A |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| ROCK | 2-149-675-01 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| CAM FOLLOWER | KYB-M704A-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| NPM 185 NOZZLE | N610070338AB |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| BELT | N510021326AA |
| Fuji Filter | AA1FZ04 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| BUSH,BEARING | KYB-M3T3R-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| NPM 230CS NOZZLE | N610040788AD |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| PIN_HINGE | KYD-MC41U-000 |
| NPM H16 SENSON | N510054833AA |
| PIN,LOCATE | KYD-MCN3N-000 |
| COUPLING | KYB-M7116-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| PIN,HINGE | KYB-M3T31-000 |
| PIN_LOCATE | KYD-MC132-000 |
| SONY NOZZEL | AF10071 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| VALVE | 2-673-684-01 |
| LEVER | KYB-M3T0M-000 |
| COUPLING | KYB-M702C-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| SPRING COMP | KYD-MC13T-000 |
| ASSY GRIP | KYD-MC21H-000 |
| SPRING_COMP | KYB-M91CS-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| SONY1000 FILTER | 4-761-920-01 |
| COVER ASSY | X-4700-067-4 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| YG12F BELT | KHY-M9129-00 |
| POGO BLOCK | 0738A-0029 |
| DD MOTOR | KYF-M860E-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| SPRING COMP | KYD-MC422-000 |
| UNIT,I/O | KYL-M86LV-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| SPRING_COMP | KYD-MC129-000 |
| BOTTON | ZB6-EB3B |
| PIN,HINGE | KYD-MC41S-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| P_RCG_SCOPE | KYB-M730B-000 |
| CYLINDER | KYL-M869A-000 |
| GEAR | KYD-MC23C-00 |
| 234F NOZZLE | 45466931 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BLOCK | KYF-M867D-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| SDD Hard Disk | N610059692AA |
| WASHER | 92902-03100 |
| GRIP | KYD-MC109-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| GXH SPECIAL NOZZLE | 13053 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| HOLDER | KYB-M702F-000/0916DK2D |
| GREASE FOR PANASONIC | N510048188AA |
| NPM 240C NOZZLE | N610062681AD |
| BELT | 00334936S01 |
| ASSY_GEAR | KYD-MC412-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| LEVER | KYB-M3T33-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| TOOL | N510031628AA |
| LEVER | KYB-M3T21-000 |
| FILTER | K46-M8527-COX |
| GUIDE | KYD-MC11T-000 |
| GREASE | N990PANA-023 |
| HV31 NOZZLE | KYL-M7718-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| GUIDE,LINEAR | KYF-M867P-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| COVER(LB) | KYM-M8657-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| BALL | 4-719-920-01 |
| NOZZLE_HG33C | KYA-M7703-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| GUIDE,LINEAR | LWHD12X3 |
| I/O CABLE,WIDE | 0938A-1007 |
| BRACKET | KYL-M86KD-000/211FC709 |
| COVER(RB) | KYM-M8612-000 |
| LEVER | KYK-M861V-000 |
| NPM 230C NOZZLE | N610040784AD |
| NOZZLE(BA06) | KYB-M77A6-000 |
| SEAL | KYB-M702B-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| LEVER | KYB-M3T22-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| COVER (12/16mm) | KYD-MC20Y-000 |
| HNS,CORD | KYL-M8621-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| COVER(RB) | KYD-MC10L-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NOZZLE_HG52C | KYA-M7705-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| ETC MOTOR | PK2K93S-2D |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| SENSOR | KYF-M8681-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| PLATE | KYA-M3804-000 |
| COVER | KYM-M860X-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| SENSOR,PELEC | KYL-M86HL-000 |
| SEAL | KYB-M704E-000 |
| ASSY_LEVER | KYD-MC212-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| WASHER | KYD-MC22H-00 |
| LEVER(SUP) | KYD-MC20D-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| SEAL | KYT-M862W-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| PCB-MOUNT | KYK-M861W-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| PIN-GAUGE | KXF00YHUA00 |
| GEAR | KYK-M864C-000 |
| MOTOR_DC | KYD-MC410-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| PIN_LOCATE | KYD-MC137-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| SPRING_COMP | KYD-MC3T-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| LEVER | KYB-M3T01-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| GEAR | KYD-MC424-000/223E0481 |
| ASSY_TENSION | KYD-MC21N-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| PIN,HINGE | KYL-M860R-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| DRIVER | N510002593AA |
| GEAR | KYD-MC21U-000 |
| KIC ON BOARD | 6-10 CHANEL |
| GEAR | KYD-MC23C-000/6301352305 |
| FEEDER | GD38080 |
| SLIP RING | KYB-M7027-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| BLOCK | KYL-M86KC-000/211G5472 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| MOTOR | KYA-M700R-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| PIN-GAUGE | KXF00YHTA00 |
| BELT | 6*3080*0.9 mm |
| DSP-2008K SQUEEGE | L:20CM |
| SPRING | P/N:0730C-0252 |
| NPM X479 VALVE | N510054843AA |
| FUSH-SPECIAL | KYF-M860F-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| VALVE | SY3240-5LZD |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| ROLLER(B) | KYK-M86EM-000 |
| GEAR | KYD-MC20K-00 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| 1220 NOZZLE | 51305323 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| BLOCK | KYA-M7027-000 |
| LEVER | KYK-M86LV-000 |
| PCBA FIXTURE | FC150-130-60 |
| NPM 226CS NOZZLE | N610040783AB |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| NPM H16 SHAFT | N510064335AA |
| 937 NOZZLE | 00322591-06 |
| NOZZLE_HV13C | KYA-M7713-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| ASSY,LEVER | KYM-M864H-000 |
| BELT TIMING | KYA-M9152-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| FAN | 1204KL-04W-B59 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NOZZLE_HV14C | KYA-M7714-000 |
| BLOCK L3 | KYB-M960C-000 |
| HELICAL SPRING | N210068065AA |
| GUIDE,LINEAR | KYK-M86LE-001 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| LINE-SENSOR | KYF-M8607-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| RT BELT | 3-212-264-01 |
| NPM 235C NOZZLE | N610043814AD |
| GEAR | KYU-M868B-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY,LEVER | KYM-M8648-000 |
| 933 NOZZLE | 00346523-03 |
| GEAR | 4-719-921-02 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| ARM STEEL | N210007284AB |
| PIN,HINGE | KYB-M3T2Y-000 |
| 904 NOZZLE | Y074-V904-0015 |
| CASE-CONN | KYK-M860Y-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| WASHER | 92902-03200 |
| BM02 NOZZLE | BM02 |
| Encoder Read Head For Universal | 49566101 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| 938 NOZZLE | 00322592-05 |
| ASSY,GEAR | KYM-M862C-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| 340F NOZZLE | 45466934 |
| NOZZLE | HG53G |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| PIN_HINGE | KYD-MC42S-000 |
| DISK | KYB-M3T1A-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| CPK JG0250 | CPK JG0250 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| CORD,BCR | KYF-M86NC-000 |
| SONY NOZZEL AF12082 | AF12082 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| TAIL PIVOT | P/N:0740C-0109 |
| SLIP RING | KYB-M7027-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| BELT | 6*3080*0.9 mm |
| Fuji Packing | PH00991 |
| MICRO METER | 350-251-30 |
| HOLDER | KYB-M701R-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
