Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
630 123 7138 / KYL-M860A-000 UNIT DRIVER Hitachi Smt Parts
| Part No | 6301237138 / KYL-M860A-000 |
| Part Name | UNIT DRIVER |
| Condition | Original news or Compatible new |
| Usage | Hitachi machine |
| Type | Hitachi SMT part |
Hot sale stock list:
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| KIC ON BOARD | 6-10 CHANEL |
| LEVER | KYB-M3T21-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| GXH-1 FILTER | KYL-M860S-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| GXH SPECIAL NOZZLE | 13053 |
| SPRING_COMP | KYD-MC3T-000 |
| GEAR | KYD-MC20K-00 |
| 234F NOZZLE | 45466931 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| SPRING | P/N:0730C-0252 |
| GUIDE | KYD-MC11T-000 |
| VALVE | SY3240-5LZD |
| ASSY_SHAFT | KYF-M8651-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| TOOL | N510031628AA |
| GEAR | KYK-M864C-000 |
| WASHER | 92902-03100 |
| COVER | KYK-M86RD-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| UNIT_DRIVER | KYK-M860F-000 |
| GEAR | KYD-MC153-00 |
| ASSY,GEAR | KYM-M862C-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| I/O CABLE,WIDE | 0938A-1007 |
| 360F NOZZLE | 45466917 |
| BUSH,BEARING | KYB-M3T3S-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| CYLINDER | KYL-M869A-000 |
| UNIT,I/O | KYL-M86LV-000 |
| BOTTON | ZB6-EB3B |
| NOZZLE_HV14C | KYA-M7714-000 |
| COUPLING | KYB-M702C-000 |
| BELT | 44548605 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| CASE-CONN | KYF-M860Y-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| 904 NOZZLE | Y074-V904-0015 |
| HNS,LIGHTING | KYF-M861W-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| NPM X479 VALVE | N510054843AA |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| PIN,HINGE | KYD-MC41S-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| SENSOR,PELEC | KYL-M86HL-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| SENSOR-PELEC | KYK-M861Y-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| HOLDER | KYB-M701R-000 |
| SONY1000 FILTER | 4-761-920-01 |
| COVER(RB) | KYM-M8612-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| NPM H16 SHAFT | N510064335AA |
| WASHER | 90990-37J010 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| FUSE | KYL-M86KH-000 |
| LEVER | KYB-M3T0M-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| WASHER | 92902-03200 |
| ASSY,LEVER | KYM-M8648-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| SPRING COMP | KYD-MC422-000 |
| BELT | 6*3080*0.9 mm |
| ASSY_GEAR | KYD-MC11A-000 |
| DD MOTOR | KYF-M860E-000 |
| PLATE | KYA-M3804-000 |
| SONY NOZZEL AF12082 | AF12082 |
| BELT TIMING | KYA-M9152-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| 340F NOZZLE | 45466934 |
| GEAR | KYD-MC21U-000 |
| TIMING BELT | KYB-M919E-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| WASHER | KYD-MC22H-00 |
| NPM 240C NOZZLE | N610062681AD |
| MICRO METER | 350-251-30 |
| FEEDER CABLE | KYL-M869D-000 |
| COVER(RB) | KYD-MC10L-000 |
| FAN | 1204KL-04W-B59 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| PIN-GAUGE | KXF00YHTA00 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| LEVER | KYB-M3T01-000 |
| SONY NOZZLE | CF25200 |
| LEVER | KYK-M861V-000 |
| Fuji Packing | PH00991 |
| PIN-GAUGE | KXF00YHUA00 |
| BLOCK | KYA-M7027-000 |
| NOZZLE | HG53G |
| RT BELT | 3-212-264-01 |
| FEEDER | GD38080 |
| CAM FOLLOWER | KYB-M704A-000 |
| ASSY GRIP | KYD-MC21H-000 |
| HELICAL SPRING | N210068065AA |
| ASSY_GEAR | KYD-MC412-000 |
| VALVE | SY3120-MZD-C6-F2 |
| GEAR | KYD-MC23C-00 |
| PULLEY_TIMING | KYB-M91AL-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| 1220 NOZZLE | 51305323 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| PIN,HINGE | KYL-M860R-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| GREASE | N990PANA-023 |
| DRIVER | N510002593AA |
| 935 NOZZLE | 00346524-03 |
| YG12F BELT | KHY-M9129-00 |
| BELT | 6*3080*0.9 mm |
| ASSY_CABLE | KYL-M86NC-000 |
| ARM STEEL | N210007284AB |
| UNIT-DRIVER | KYK-M861A-000 |
| DSP-2008K SQUEEGE | L:20CM |
| SEAL | KYB-M704E-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| CASE-CONN | KYK-M860Y-000 |
| B-234 NOZZLE | 47561103-B-234 |
| YG12 BELT | KHY-M9129-10 |
| VALVE | 2-673-684-01 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| BALL | 4-719-920-01 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| 938 NOZZLE | 00322592-05 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| GEAR | KYU-M868B-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| VALVE | 4-187-212-01 |
| ETC MOTOR | PK2K93S-2D |
| MOTOR_DC | KYD-MC410-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| PIPE FITTING | 630 048 4656 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SPRING_COMP | KYB-M91CS-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| GERA(HASUBA) | KYD-MC131-000 |
| NPM H16 SENSON | N510054833AA |
| NOZZLE(HB03C) | KYB-M7720-100 |
| Fuji Filter | AA1FZ04 |
| BRACKET | KYL-M86KD-000/211FC709 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| FFU | MX--575-A |
| NPM 185 NOZZLE | N610070338AB |
| SHAFT ASSY. | KYF-M864U-000 |
| SLIP RING | KYB-M7027-000 |
| PLATE | N610014970AE |
| PIN_LOCATE | KYD-MC137-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| NPM H8 SENSON | N510048691AA |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| 933 NOZZLE | 00346523-03 |
| GEAR | KYD-MC424-000/223E0481 |
| GEAR | 4-719-921-02 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| BELT_TIMING | KYA-M914W-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| BELT | N510021326AA |
| BLOCK | KYL-M86KC-000/211G5472 |
| COUPLING | KYB-M7116-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| BLOCK L3 | KYB-M960C-000 |
| PIN_HINGE | KYD-MC42S-000 |
| SONY NOZZEL | AF10071 |
| TAIL PIVOT | P/N:0740C-0109 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| MACHINE SCREW | KYD-MC14G-000 |
| BELT | N510065133AA |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| LINE-SENSOR | KYF-M8607-000 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| ROCK | 2-149-675-01 |
| SEAL | KYT-M862W-000 |
| 937 NOZZLE | 00322591-06 |
| LEVER | KYK-M86LV-000 |
| CPK JG0250 | CPK JG0250 |
| NPM FILTER | N610097899AA |
| COVER | KYM-M860X-000 |
| COVER ASSY | X-4700-067-4 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| PIN,HINGE | KYB-M3T31-000 |
| GRIP | KYD-MC109-000 |
| COVER(LB) | KYM-M8657-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SPRING_COMP | KYD-MC129-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY,LEVER | KYM-M864H-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| BELT | 00334936S01 |
| POWER SUPPLY | 1-474-020-11 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| CORD,BCR | KYF-M86NC-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| PIN_LOCATE | KYD-MC132-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| HNS,CORD | KYL-M8621-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| PIN_HINGE | KYD-MC41U-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GEAR | KYD-MC23C-000/6301352305 |
| PIN,HINGE | KYB-M3T2Y-000 |
| BM02 NOZZLE | BM02 |
| Encoder Read Head For Universal | 49566101 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| LEVER | KYB-M3T33-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NPM 230C NOZZLE | N610040784AD |
| ASSY_TENSION | KYD-MC21N-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NPM 235CS NOZZLE | N610043815AA |
| NOZZLE(FA06) | KYB-M77F6-000 |
| BELT | N510060977AA |
| SPRING COMP | KYD-MC13T-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| NPM 230CS NOZZLE | N610040788AD |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| NPM 235C NOZZLE | N610043814AD |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| BUSH,BEARING | KYB-M3T3R-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| SPRING_COMP | KYD-MCN41-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| NOZZLE(VC74) | KYK-M7725-000 |
| COUPLING | KYK-M86AW-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| SEAL | KYB-M702B-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SLIP RING | KYB-M7027-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| FILTER | K46-M8527-COX |
| ASSY GEAR | KYD-MC211-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| SONY MOTHER BOARD | 1-797-651-12 |
| DISK | KYB-M3T1A-000 |
| SENSOR | KYF-M8681-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| BLOCK | KYF-M867D-000 |
| LEVER | KYB-M3T22-000 |
| ROLLER(B) | KYK-M86EM-000 |
| ASSY_LEVER | KYD-MC212-000 |
| GUIDE,LINEAR | LWHD12X3 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| SDD Hard Disk | N610059692AA |
| POGO BLOCK | 0738A-0029 |
| SONY E1000 FILTER | 4-761-920-01 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| MOTOR | KYA-M700R-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| POWER SUPPLY | 11632XA |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| NPM 226CS NOZZLE | N610040783AB |
| GREASE FOR PANASONIC | N510048188AA |
| MOTOR_DC | KYD-MCN2G-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| PCB-MOUNT | KYK-M861W-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
