Active Member
|
[China]
Address: Xinke International Building Liangjiang New Area,Chongqing .China
Contact name:Judy Chen
Juvi Marine Machinery Co.,LTD |
|
|
Marine Electric Anchor Windlass deck equipment marine anchor
windlass
Specification of Marine Electric Anchor Windlass
| Deck Equipment Series | 1. Mooring Rope/Cable Winch(Hydraulic/Electric) 2. Mooring Anchor Windlass/Winch(Hydraulic/Electric) 3. Mooring Towing Winch 4. Mooring Position Winch 5. Cargo Winch 6. Moving-Boat Winch 7. Scientific Research Winch 8. Linear Winch 9. Double Row Rope Winch 10. Winch Type Towing System 11. Military Bell Winch 12. Offshore Winch |
| Drive Power | Electric /Hydraulic/ Manual/ Diesel |
| Warping Head, Gypsy and Drum | Single/Double, Customized |
| Gypsy Size | Dia. 12.5-127mm(U2,U3), Customized |
| Working Load | 1 Ton to 350 Ton, Customized |
| Warping Head | 10KN-100KN, Customized |
| Holding Load | 68KN-3010KN, Customized |
| Power Required | 4-132KW, Customized |
| Chain Speed | ≥9m/min, Customized |
| Clutch | Manual /Hydraulic Operated Jaw Clutch |
| Brake | Spring Applied Pneumatically or Hydraulic Released Band Brake |
| Release | Emergency Quick Release |
| Control Type | Local Control Console and remote Control Panel |
| Options | Drag Brake System; Length and Tension Monitoring Systems Stainless Steel Brake Drum; Chain Stopper; Fairlead, etc |
| Advantages | High quality with competitive prices |
| Much experience in production and exportation | |
| Special design for different clients. | |
| Short delivery time if clients need urgently | |
| Certificate: ABS, BV, CCS, DNV-GL, KR, LR, NK, RINA, RS, PRS, IRS, CRS |
Depending on the situation, the operation of a Marine windlass may also adopt the method of stopping the ship to the ground and using the windlass power to draw out the anchor and chain to anchor the ship until the desired length of chain is completely loose on the seabed. After throwing the anchor, hold the chain making equipment, brake the brake belt, the clutch is off, and the power source of the anchor is blocked.
It is generally not advisable for ships to anchor in open areas during heavy waves to prevent chain breaking, anchor loss and damage to windlass. Anchor pulling operation: inform the power supply and chain water in advance, close the clutch, open the brake belt and chain making equipment, and pull anchor according to the instruction. In the process of winching, pay attention to the investigation to prevent overload work. After receiving the anchor, brake, hold up the chain making equipment, release the clutch, close the power supply, and finish the work.
