Active Member
|
[China]
Address: Xinke International Building Liangjiang New Area,Chongqing .China
Contact name:Judy Chen
Juvi Marine Machinery Co.,LTD |
|
|
Marine Engine Parts For Weichai Water Oil Cooler Heat Exchanger TD226B WD618 WP12 R160 WD615 6170 8170
Specification
| 29090000101 | COVER SEALING | 4120001805 | ORBITAL VALVE |
| 4030000146 | OIL SEAL | 4090000158 | ROLLER RING |
| 4.11E+12 | FAN SUPPORT | 29250000151 | DISC |
| 29070000581 | BUSHING | 4021000058 | BEARING |
| 4043000055 | PUST RING | 4041001219 | TUBE |
| 4.11E+12 | CYLINDER BOLT | 4.11E+12 | GASKET |
| 4.11E+12 | FAN PULLY | 4120000084 | AIR DYR ST-50G |
| 4130000427 | BATTERY SWITCH | 4110001149 | FAN |
| 4043000015 | PIN | 4.11E+12 | THERMOSTAT |
| 4.11E+12 | SOLENOID VALVE | 4.11E+12 | CLAMP |
| 4.11E+12 | SCREW | 4.11E+12 | BELT |
| 4.12E+12 | SEALING RING KIT | 4.12E+12 | CYLINDER PLATE |
| 4.12E+12 | BREAK PAD | 4120000675 | BREAK BOOSTER |
| 4120001795 | BREAK VALVE | 29070000081 | WHEEL NUTS |
| 29160000021 | BUCKET BUSH | 4.11E+12 | EGR COOLER |
| 4120001969 | HYDRALIC PUMP | 4.12E+12 | RELIF VALUE |
| 29070009161 | LOCK BLOCK | 29070000071 | 29070000071 |
| 29070000391 | CAGE | 29090000071 | SPIRAL BEVEL GEAR |
| 29070000361 | DIFFERENTIAL | 4120001740 | VENT NOZZLE |
| 4.12E+12 | INTERNAL PLIERS | 29170037071 | BUCKET |
| 7200000136 | TIRE INNER TUBE | 7200000137 | TIRE SHOE |
| 4.12E+12 | PISTON ROD | 4.12E+12 | SEALING KIT |
| 29010000031 | CLAMP | 29220000131 | CONNECTOR |
| 29220001241 | JOINT BLOCK | 29220000531 | AIR RESERVOIR |
| 29230007522 | BRACKET | 29220009121 | WASHER |
| 4120000760 | SWITCH | 29240011611 | FRONT FRAME |
| 29250000301 | WASHER | 29250000151 | DISC |
| 4110000725 | ACCELERATOR PEDAL | 29080007521 | FRONT DRIVE SHAFT |
| 29080000031 | MIDDLE BRAKET | 29080007531 | MIDDLE DRIVE SHAFT |
| 29090000101 | SEALING COVER | 29070010911 | FINAL DRIVE ASSEMBLY |
Heat exchanger
Heat exchanger (also known as heat exchanger or heat exchange equipment) is a device used to transfer heat from hot fluid to cold fluid to meet the specified process requirements. It is an industrial application of convective heat transfer and heat transfer. Heat exchangers can be classified in different ways. According to its operation process, it can be divided into three types: partition type, hybrid type, and heat storage type (or heat recovery type); according to the compactness of its surface, it can be divided into two types: compact type and non-compact type.
Cast iron
The cast iron type is bulky and heavy. But the copper tube inside can be opened and checked before buying it, it is not easy to be cheated by the merchant, and the copper tube can be replaced if it is broken after a few years.
Cartridge
The barrel type has small volume and high exchange efficiency. However, the user cannot check the length of the copper tube inside, nor can he replace the copper tube, and it is not very beautiful.
Steel system
The volume of steel system is large and small. The user cannot check the length of the copper tube inside, and cannot replace the copper tube. But it is more beautiful.
Plate
Plate type, small size and low weight. The heat exchange efficiency is very high. There is no copper tube inside. The heat exchange capacity is related to the number of layers. The number of layers is visible and tangible.
Scale
The above various exchangers will produce scale during use. After a few years of use, the water flow will be small and the water will not be too hot. However, professional descaling companies have also appeared in Shijiazhuang and other places. After being professionally descaled, it can be the same as new.
