Brembo V6 6 Pot Brake Kit 355*34mm Disc For Mercedes Benz E400l

Brembo V6 6 Pot Brake Kit 355*34mm Disc For Mercedes Benz E400l

Configuration list

Caliper: Brembo V6 brake caliper * 1 pair
Brake disc: 355 * 34mm hole wire disc * 1 pair
Brake pad: HP1000 Street brake pad * 4 pads
Brake Hose: dicase upgrade * 1 pair
Disc Bell : blade * 1 pair
Caliper bracket: special car customized * 1 pair

The car needs to run fast and brake well. Many car owners are dissatisfied with the original brakes and want to upgrade the brakes. So what should we pay attention to.

General brake upgrade package includes caliper, brake disc, brake pad, disc bell and caliper bracket

calipers

Generally, the calipers of the original factory are mostly one-way single piston, while the calipers of the refitted brand are generally two-way multi piston, generally with 4 pistons, 6 pistons and 8 pistons. Two way multi piston can provide greater and more uniform braking force than the original caliper.

brake disc

The modified brand brake discs are generally larger than the original brake discs. Most of the brake discs are split type with ventilation holes. The larger brake disc provides a larger braking area, the split ventilation disc is stressed evenly, and the heat dissipation of the brake disc is improved. The design of scribing type and punching type can quickly remove the powder falling from the brake pad along the hole during braking, reduce the slip phenomenon caused by the powder and improve the friction

Brake pads

Due to the requirements of cost, durability, cleanliness (brake powder) and low-temperature efficiency, the friction coefficient (MU) of the original brake skin is generally not very high (about below 0.4), and can not withstand the temperature of more than 300 ℃. Therefore, the efficiency will decline after continuous use for many times.

It is recommended that ordinary fans can choose "Sports" brake shoes with working temperature of about 0 ℃ to 500 ℃ and mu value of more than 0.4, which can meet the needs of most situations (IDI, PFC, FERODO and project Mu have this type of choice). (it can be seen from the bottom of the box that this brake skin is suitable for ap5200 large four piston suit, and the brand of brake skin is MinTex)

Brake steel throat

For drivers who pay attention to the feeling of braking feet, replacing the brake oil pipe is also a cost-effective upgrading project. Because the outer layer of the original brake oil pipe is generally made of rubber materials, the rubber oil pipe will expand due to the high pressure of the brake oil during strong braking, which slows down the flow speed of the brake oil and slows the braking response when stepping on the brake pedal, The foot feel is not realistic enough. The upgraded brake oil pipe is wrapped with a layer of strong metal wire on the outside of the rubber pipe to reduce the expansion of the oil pipe, so it is also called brake steel throat. After replacing the brake steel throat, the feedback force of the brake pedal will be significantly enhanced, giving people a solid feeling of jacking feet.

2014 Mercedes Benz e400l 3.0L twin turbocharged original 18 inch wheel hub is upgraded. 6 pot brake kit Brembo V6 imported from Italy is combined with 355 * 34 high carbon disc high-performance brake package. The wheel hub of the original car is installed without damage, which should be fast and braking!