Guangzhou Yuanxing Industrial Co., Ltd. |
|
Jekit Car Big Brake Caliper GT6 Matte Gray-Green Logo Customized
Set introduction
Product name | 6 pot brake kit |
For Disc Size | 355*32mm/362*32mm/380*34mm/405*34mm |
Material | Aluminum |
For Bell Type | Customized |
Quality | 100% Tested |
Functional Characteristics | Vortex in the form of rapid cooling ,improve 40% of the braking effect and brake friction performance. |
Full set included | 1 pair brake caliper/1 pair brake disc with center cap and bracket/ 1 pair brake line/1 set brake pads |
Modification knowledge
Caliper brake principle
Use the brake calipers to control the two brake pads to clamp the
brake discs on the wheels. When the brake pad clamps the disc,
friction occurs between the two. When a car is driving on wet or
icy low-friction roads, if excessive braking occurs, the wheels
will be locked by the braking device and lose grip, causing the
vehicle to lose its ability to control its direction.
In order to enable the vehicle to effectively control the forward
direction on such dangerous roads, the ABS "anti-lock braking
system" was developed. The increasingly powerful ABS "anti-lock
braking system" can also allow TCS-TractionControlSystem "tracking
control system" and VSC-VehicleStabilityControl "vehicle stability
control system" (equivalent to ESP) to control the Tracking
performance when driving, and control the stability of the vehicle
when cornering. Drum brakes have been used in automobiles for
nearly a century, but due to its reliability and powerful braking
force, drum brakes are still installed on many models (mostly used
on the rear wheels). Drum brakes use hydraulic pressure to push the
brake pads installed in the brake drum outwards, causing the brake
pads to rub against the inner surface of the brake drum that
rotates with the wheels to produce a braking effect. The inner
surface of the brake drum of the drum brake is the position where
the brake device generates the braking torque. Under the condition
of obtaining the same braking torque, the diameter of the brake
drum of the drum brake device can be much smaller than the brake
disc of the disc brake. Therefore, in order to obtain powerful
braking force, large-sized vehicles with heavy load can only
install drum brakes in the limited space of the rim.
advantage
1. Disc brakes have better heat dissipation than drum brakes, and
they are less likely to cause brake degradation and brake failure
when the brakes are continuously stepped on.
2. The size change of the brake disc after being heated does not
increase the stroke of the brake pedal.
3. The disc brake system responds quickly and can do high-frequency
braking actions, so it is more in line with the needs of the ABS
system.
4. Disc brakes do not have the automatic braking effect of drum
brakes, so the braking force of the left and right wheels is
relatively even.
5. Because the brake disc has better drainage, it can reduce the
situation of poor braking due to water or sand.
6. Compared with drum brakes, disc brakes are simple in structure
and easy to maintain.
Reference data:
JKGT6 355*32mm fit for 18 inch rim ;
JKGT6 362*32mm fit for 19 inch rim ;
JKGT6 380*34mm fit for 20 inch rim ;
JKGT6 405*34mm fit for 21 inch rim ;
JKGT6 disc or bell size and color and style is customized. welcome
to contact customer service.
Please provide the car model and Vin code and rim size to the
customer service.Welcome your consultation, our customer service
will offer you the most professional consultation and the most
enthusiastic service.
reference picture