Active Member
|
[China]
Address: Economic development zone ,Zhangjiagang city, Jiangsu Province CHINA
Contact name:James
ZHANGJIAGANG FLAME MACHINERY CO.,LTD. |
|
|
| Type | TWZ-300T |
| Clapping force(TON) | 300 |
| Stroke(MM) | 300 |
| Working Plate Size(MM) | UP:600*600Down:650*650 |
| Dimeter of cyhnder(MM) | 450 |
| Horse powet(HP) | 10 |
| Heater power(KW) | 17 |
| Total power(KW) | 31 |
| Gross weight(KG) | 6700 |
| Machine size(MM | 2900×2700×2600 |
| colour | bule |
Applicable products
Auto parts, rubber packing, medical rubber, O ring, key, rubber for
civil use, industrial rubber and bottle
stopper, etc.
The machine is mainly composed of:
(1) body parts;(2) heating components;(3) hydraulic components;(4) electrical control components
and other four components.Among them:
(1) body parts: frame, roof, support plate, bottom plate, oil cylinder, etc.
(2) heating plate components: composed of heating plate, heat shield, electric heat pipe, etc.
(3) hydraulic components: motor, plunger pump, vane pump, hydraulic control valve oil tank, etc.
(4) electrical control components: control buttons, contactors, relays, time relays, temperature controllers, etc.
(iv) working principle of electrical system [see electrical schematic diagram]
(1) overview
A.The temperature controller displays the temperature of the plate. When
the green light is green,
the heating starts; when the red light is red, the heating stops.
B.The time relay sets the vulcanization timing time. The system starts
timing when the pressure
reaches the setting pressure of the electrical connection meter.The
alarm rings when the time is up.
C.After the power indicator light closes the power switch in the electrical
box, open the power switch
selection button, and the power indicator light on the panel will be on.
D.Buzzer -------- alarm after vulcanization timing.
E.Start button press start button, motor start up plunger, operation
indicator light.
F.Press the stop button to stop the die closing.
G.When the heating switch is on, the heating starts. When the switch
is off, the heating stops.
H.The power switch button turns on the control power.
