Active Member
|
[China]
Address: Economic development zone ,Zhangjiagang city, Jiangsu Province CHINA
Contact name:James
ZHANGJIAGANG FLAME MACHINERY CO.,LTD. |
|
|
| Type | TWZ-100T | TWZ-200T | TWZ-250T |
| Clapping force(TON) | 100 | 200 | 250 |
| Stroke(MM) | 2500 | 250 | 300 |
| Working Plate Size(MM) | UP:400*400 Down:450*460 | UP:520*520 Down540×560 | UP:600×600 Down:600×650 |
| Dimeter of cyhnder(MM) | 250 | 355 | 400 |
| Horse powet(HP) | 7.5*2 | 10×2 | 10×2 |
| Heater power(KW) | 16 | 25 | 31 |
| Total power(KW) | 30 | 45 | 52 |
| Type of mold openning | 2RT/3RT/4RTUP/DownIn/Out-2RT/3RT/4RT | ||
| Gross weight(KG) | 7000 | 9000 | 11500 |
| Machine size(MM) | 2600*2100*2100 | 3600×2200×2500 | 4100*2400*2500 |
Control electrical fault:
There are many reasons for electrical failure, generally, the wire falls off
or the small relay falls off and is damaged.Can be checked according
to the electrical schematic diagram, generally can be eliminated after
checking one by one.
Machine maintenance:
The machine in the use of the process of regular maintenance is to ensure the normal operation of the necessary conditions, especially in the initial use of new machines is particularly important.The pressure holding performance of the machine mainly depends on the cleanliness of oil.Therefore, after three months of use, the oil should be pumped out and refilled into the tank after filtration. The oil can still be used.The fastener of the machine, the big nut of the four-pillar machine and the screw of the top plate should be checked frequently.
