Automatic Vertical Glass Washer and Brief introduction of automatic glass cutting line

►The water tank system and water heating fuction

►Using Europe's advanced anti-noise system to create a good working environment for employees.The noise can be controlled below 90 decibels by using nylon gear and sponges.

Brief introduction of automatic glass cutting line

The overall plan of the project: CNC automatic glass cutting line is composed of automatic loading table, automatic cutting table and air-floated breaking table. The automatic glass cutting line is mainly used in the processing of flat glass, which can quickly and accurately load sheets, cut straight-line,special-shaped glass and air-floated mechanical breaking sheets.Work flow is as follows: Loading table uses mechanical turnover, through the vacuum suction cup taking glass sheet from the rack, put down to the loading table. The glass is conveyed to the cutting table through the roller on the loading table and the conveyor belt on the cutting table.The cutter holder on the cutting beam of the cutting machine drives the cutter to move at high speed in X direction and Y direction by servo motor. Using Z-axis motor rotation to control the tangent trajectory of tool. At the same time, the cutter pressure and the depth of the cutter are controlled by analog quantity, and the four axes are operated simultaneously to cut. When the cutting is finished, the glass sheet is sent to the air-floated breaking table for breaking through the air cushion formed by the conveyor belt and the breaking table.

• Max size:6100×3300mm

• ,Thickness:3～19mm

• ,Cutting accuracy:±0.30

• ,Cutting accuracy of special-shaped glass:±0.35

• ,Cutting speed:0-200m/min

• ,Conveying speed:0-25m/min

Annex: Layout plan

Optimization software:

• ,Importable optimization results done in the Office

• ,Cutting scheme can be manually created and edited

• ,With copy and mobile functions

• ,Manual editing of cutting sequence

• ,The cutting scheme can be quickly created by X, Y and Z modes.

• ,Simultaneous optimization of multiple original and small patches

• ,Optimized typesetting without size limitation

• ,Optimized Result Rotation, Mirror Management, etc.

• ,Priority management for small size cutting optimization

• ,Priority management of original glass sheet optimization

• ,Template Scanning Function and Scanning Graphics Processing

• ,Original glass sheet storage Management

• ,20 efficient optimization algorithms

• ,Cutting graphics can be edited

• ,Label Design and Label Printing(Label-WAY)

• ,Clear Printing of Optimized Result Report

• ,Excel Data File Import

• ,Low-E and Adhesive Glass Cutting Management

• Note: The total length of the line increases by 6.8 meters for each additional work station on the loading table.