Home Companies Jinan Lijiang Automation Equipment Co., Ltd.

Automatic Vertical And Horizontal Washer and Sealant-spreading Machine for insulating Glass

Contact Us

[China]

Trade Verify

Address: Block B 1307, Green Square, Huaiyin District, Jinan China

Contact name:Rose

Jinan Lijiang Automation Equipment Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Automatic Vertical And Horizontal Washer and Sealant-spreading Machine for insulating Glass

Country/Region	china
City & Province	jinan shandong

Product Details

Automatic Vertical And Horizontal Washing And Drying Machine Easy Opration Glass Cleaning

LIJIANG GLASS- FOR WORLD GLASS MACHINE USER SERVICE

Glass Washing Machine LJLBQJ2500

Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500
used for cleaning and drying the upper and lower surfaces of
ordinary plate glass and high quality low-e glass,it is composed of
incoming segment, cleaning air-drying segment and out goingsegment.

In the washing machine ,there three pairs soft brushes all can wash
low-e glass, four pairs of water spray.
The material in the washing and drying section all made by
stainless steel.
The main power consumption is mostly appear in the washing and
drying section of the IG line.
The air knife is float design , it always keep the right and
suitable distance between the glass and air knife in the press and
design section
The transfer wheel in the washing and drying section : The front
and back transfer wheel are all moved, all actively transfered. No
mater the glass size is big or small , it all guarantee the glass
pass through smoothly
The axle and bearing of brushes are stainless steel , that all keep
the machine can washing well and live for a long time.
The who drying machine use the sound insulation design.can reduce
the noise.

►The drying roon system
 
►The water tank system and water heating fuction
►Using Europe's advanced anti-noise system to create a good working
environment for employees.The noise can be controlled below 90 decibels by using nylon gear
and sponges.
 
Sealant-spreading Machine LJST02A
Main feature
• Imported motor system to improve equipment efficiency
• Imported sealant gun,stainless steel mixer
• High pressure protect device
• Anti-back flow control structure
• Mixed rate detector can control the rate of two kinds of glue
Technical data
 
Working air pressure0.3-0.6MPa
Sealant spreading pressure15-20MPa
Sealant volume4L/min
Diameter of A/B sealant570mm/280mm
Sealant spreading air pressure ratio50:1
Mixed rate6:1-14:1
Air supplyFlow 0.8m3/min
Air pressure≥0.8MPa
Overall dimension1100*950*1630mm
 
Sealant-spreading machine LJST03This equipment was designed by advanced technology from abroad and
inside of China. It is special equipment used for spreading the
two-component polysulphide glue and/or two-component silicone
structure glue for the aluminum type insulating glass or curtain
wall glass. Special and convenient mixed device can ensure the high
quality mixing of the two-component polysulphide glue and/or
two-component silicone structure glue. This equipment is featured
by uniform mixture and continuous stability of extruded glue, good
spreading effect and high production efficiency.
 
Product name
Sealant-spreading machine LJST03
Working air pressure
0.3-0.6MPa
Sealant spreading pressure
15-20MPa
Sealant volume
4L/min
Diameter of A/B sealant
570mm/280mm
Sealant spreading air pressure ratio
50:1
Mixed rate
6:1-14:1
Air supply
Flow 0.8m3/min
 
 
 
 
 
 
 
 