Home Companies Shenzhen Wisdomlong Technology CO.,LTD

Ge Fanuc IC693ALG223C ， Series 90-30 Programmable Logic Controller

Contact Us

[China]

Trade Verify

Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China

Contact name:Eva

Shenzhen Wisdomlong Technology CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Ge Fanuc IC693ALG223C ， Series 90-30 Programmable Logic Controller

Country/Region	china
City & Province	shenzhen guangdong
Categories	Tool Processing Services

Product Details

Ge Fanuc IC693ALG223C , Series 90-30 Programmable Logic Controller

Product Description

IC693ALG223 is a PACSystems Series 90-30 RX3i Analog Current Input Module that offers 16 channels. The module’s 16 separate and single ended channels can be configured for any of the following three ranges: 4 to 20 mA, 0 to 20 mA, or 4 to 20 mA Enhanced. Both high and low alarms are obtainable on each range. In the enhanced range, the IC693ALG223 module can be set with a low alarm limit to detect input current with open wire fault detection in the 4 to 20 mA applications; high alarm alerts can also be set by the user. Additionally, this module reports status, including power supply standing to the CPU. IC693ALG223 can be used in any I/O slot that offers a serial connector in the RX3i or Series 90-30 system.

Specific to the IC693ALG223 module, 120 mA from a 5 VCD bus on the controller backplane is consumed. This also needs a 65 mA plus current loop from a +24 VDC supply supplied by the user. An update rate of 6 ms is standard with isolation of 250 VAC continuous or 1500 VAC for one minute. When scanning active channels, the number of channels to be scanned will be completed in serial order. Analog values are scaled over the entire range of the converter with factory calibration adjusting the analog value per bit. RX3i racks support upgrades to the firmware associated with this module, but this does not include 90-30 racks. The IC693ALG223 is also equipped with LED status lights emitting ON, OFF, and FAIL to assist the user in operation and troubleshooting.

Technical Specifications

No. of channels:	1 to 16 selectable
Input Current Range:	0 to 20 mA, 4 to 20 mA and 4 to 20 mA enhanced
Calibration::	Factory calibrated to 4 µA per count or 5 µA per count
Update Rate:	13 msec (all 16 channels)
Input Filter Response:	19 Hz
Power Consumption:	120 mA from the +5 V bus or 65 mA from the +24 V bus

About IC693ALG223

The GE Fanuc Series 90-30 Programmable Logic Controller (PLC) module with catalog number IC693ALG223 is a Sixteen (16) channels, single ended, analog input module that is used to interface field devices and instrument that provide analog signals as representation to measurement of process variable. Specifically, each channel of the IC693ALG223 is configurable of receiving 0-20 mA, 4-20 mA and 4-20 mA enhanced signals. Some of the devices that are capable of providing these signals are Transmitters, Variable Frequency Drive’s (VFD) speed feedback, data loggers, panel meters and other devices.

The IC693ALG223 is a single slot module that is installed to any slot of a Series 90-30 5-slot or 10-slot baseplate. Depending on the controller installed, the number of allowed instances of the IC693ALG223 varies. For Model 311, Model 313, and Model 323 system, up to Four (4) module instances is compatible. For Model 331 system, Eight (8) modules, Twelve (12) with Model 340 and 341 system and 51 in Model 351 and 352 systems.

The IC693ALG223 has 12-bit resolution with update rate of 13 msec for all 16 channels, absolute accuracy of ± 0.25% of full scale @ 25 Deg. Celsius (77 Deg. Fahrenheit): ± 0.5% of full scale over specified operating temperature range and linearity of < 1 LSB from 4 to 20 mA for 4 to 20 mA range and < 1 LSB from 100 µA to 20 mA for 0 to 20 mA and 4 to 20 mA Enhanced ranges. This module is designed with 1500 volts isolation capability between field side and logic side.

The IC693ALG223 16-Channel Analog Input Module comes with 200 Hertz of input filter response and 250 ohms of input impedance. The maximum number of analog current input modules that may be installed in the system is 4 with CPUs 311, 313, and 323, 8 with CPU 331 and 12 with CPUs 340 and 341. It has high levels of resolution and accuracy to deal with very sensitive analog signals. It can receive analog inputs from a variety of sensors such as level sensors, flow sensors, and temperature sensors. Each channels’ accuracy are 4 microamps of resolution in the 4 to 20 milliamps current range, 5 microamps of resolution in the 0 to 20 milliamps current range, and 5 microamps of resolution in the 4 to 20 enhanced milliamps current range. It uses an external power supply with a voltage range of 20 to 30 Volts DC and 10% supply voltage ripple. This module is designed to support a wide range of industrial signals

Technical Specifications for IC693ALG223

Brand	GE Fanuc
Series	Series 90-30
Part Number	IC693ALG223
Range	4-20 mA, 0-20 mA
Accuracy	0.25% at 25 degree Celsius
Product Description	Analog Current Input
External Power	24 VDC
Product Description	Analog Current Input

No of Channels	16
Isolation	1500 volts RMS field to the logic side
Update Rate	13 ms all channels
Resolution at 4-20 mA	4 microamps
Resolution at 0-20 mA	5 microamps
Input Impedance	250 ohms
Input Filter Response	200 Hertz
Internal Power Consumption	120 mA at 5 VDC, 65 mA, User Supplied 24 VDC