|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Eva
Shenzhen Wisdomlong Technology CO.,LTD |
|
Verified Suppliers
|
|
|
The IC660TSS100 terminal assembly is a Genius terminal assembly that is used for a variety of applications in different industries. This part is manufactured by GE Fanuc and it is used for isolated I/O blocks that operate on a voltage of 115 Volts AC or 125 Volts DC. These blocks have 8 circuits separated into 2 isolated groups. Some of the features of these blocks are the output pulse test capability, CPU redundancy type, bus switching module control, selectable input filter time, output power-up options, and several different diagnostics checks and many more. The featured blocks from the Genius series require a control power level of a maximum of 8 Watts and the frequency for the input is 47 to 63 Hertz. The maximum ripple is 10%.
The IC660TSS100 terminal assembly has a power supply dropout time of 1 cycle for AC voltage and 10 milliseconds for DC voltage. The input load network has a resistor rating of 13K Ohms for both AC and DC voltage, along with an input processing time of 0.8 to 2 milliseconds. The available input diagnostics are for overtemperature, open wire, failed switch, and loss of I/O power errors. The IC660TSS100 terminal assembly also features output diagnostics that include short circuit, overtemperature, and overload diagnostics. The manufacturer offers terminal assemblies and electronics assemblies as separate products. It should be mentioned that the IC660TSS100 assembly is not compatible with some of the earlier versions of the electronics assemblies, but the series provides other compatible components like I/O blocks, bus controllers, and hand-held monitors.
The GE Fanuc IC660TSS100 terminal assembly is a terminal assembly for I/O blocks from GE Fanuc which have the catalog numbers IC660BBS100 or IC660BBS101. The IC660BBS100 I/O block is a 115 or 125 Volts DC isolated I/O block which reports failed switch diagnostics and the IC660BBS101 I/O block is a 115 to 125 Volts DC isolated I/O block which does not report failed switch diagnostics. The IC660BBS100 I/O block will also report failed switch diagnostics if the switch state of an output is not the same as the commanded state. The IC660BBS100 and the IC660BBS101 I/O blocks generate 8 Watts of heat in general, and they also generate 4.7 Watts of heat for each input circuit at a 100% duty cycle which is sinking 2 Amps and they generate 1.1 Watts of heat for each output circuit which is operating at a 100% duty cycle. The GE Fanuc I/O blocks are composed of a terminal assembly like the IC660TSS100 terminal assembly and a compatible electronics assembly. The IC660TSS100 terminal assembly is not compatible with earlier versions of GE electronics assemblies such as the IC660EBS100A to G electronics assemblies or the IC660EBS101A or B electronics assemblies.
If the GE Fanuc RX3i IC660TSS100 terminal assembly is used to replace an older version of the terminal assembly in an I/O block, then the electronics assembly will also need to be upgraded. This can be done by replacing the electronics assembly with versions like the IC660EBS101C electronics assembly or the IC660EBS100H electronics assembly or later. It can also be done by upgrading the electronics assembly firmware through one of the available upgrade kits. The environmental specifications for the IC660TSS100 terminal assembly include a -40 to 212 degrees Fahrenheit temperature range for storage and transport, a 32 to 140 degrees Fahrenheit temperature range for operation, and a 5 to 95% relative humidity range (non-condensing) for both operation and storage. The vibration rating is 5 to 10 Hertz with 0.2 inches displacement.
| Brand | GE Fanuc |
| Series | Genius I-O |
| Part Number | IC660TSS100 |
| Product Type | Terminal assembly |
| Compatibility | IC660BBS100/101 |
| Operating Temperature | 32 to 140 degrees Fahrenheit |
| Storage Temperature | -40 to 212 degrees Fahrenheit |
| Relative Humidity | 5 to 95% |
| Vibration | 5 to 10 Hertz |
| Electronics Assembly Firmware Upgrade Kits | Supported |
